IS 2062 E250 / E350 Cold-rolled PlateIS 2062 · ASTM A480 · Manufacturer, trader & exporter, India
IS 2062 E250BR · MS plate
An IS 2062 E250 / E350 cold-rolled plate is thinner plate finished by cold rolling, made from IS 2062 E250 / E350 to IS 2062. Cold-rolled plate has tighter thickness tolerance and a smoother surface than hot-rolled.
- IS 2062
- ASTM A480
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an IS 2062 E250 / E350 Cold-rolled Plate?
- What it is
- Thinner plate finished by cold rolling
- Material
- IS 2062
- Dimensions
- ASTM A480
- Grade
- IS 2062 E250 / E350
- Best at
- Structures, fabrication and general engineering in India
IS 2062 E250 / E350 Cold-rolled Plate Specification
| Product | IS 2062 E250 / E350 Cold-rolled Plate |
|---|---|
| Material standard | IS 2062 |
| Dimensional standard | ASTM A480 |
| Thickness | 4.76 mm (3/16") and up |
| Size | Mill plates or cut to drawing |
| Testing | Chemical & mechanical per heat · NDT · impact where specified |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Cold-rolled Plate
Cold-rolled plate has tighter thickness tolerance and a smoother surface than hot-rolled.
- Tighter tolerances
- Smoother surface
- Thinner gauges
More on choosing: Cold-rolled plate guide.
IS 2062 E250 / E350 Cold-rolled Plate: Why IS 2062 for cold-rolled plates
Cold-rolled plate has tighter thickness tolerance and a smoother surface than hot-rolled. In IS 2062 E250 / E350, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Carbon and low-alloy plate is the workhorse of pressure vessels and structures. IS 2062 E250 / E350 is picked for structures, fabrication and general engineering in India. |
|---|---|
| Typical service | Construction — Structural steelwork. |
| Matching filler | E7018 / ER70S-6 |
IS 2062 E250 / E350 Cold-rolled Plate Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Phosphorus | As specified |
| Sulphur | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: IS 2062.
IS 2062 E250 / E350 Cold-rolled Plate Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Yield strength | As specified |
| Tensile strength | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: IS 2062 — condition per order.
Full chemistry, properties and equivalents are on the IS 2062 E250 / E350 grade page.
IS 2062 E250 / E350 Cold-rolled Plate — questions buyers ask
When is cold-rolled plate chosen?
Where surface finish and thickness tolerance matter more than cost.
Which standard covers IS 2062 E250 / E350 cold-rolled plates?
The material is IS 2062; dimensions follow ASTM A480. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a IS 2062 E250 / E350 cold-rolled plate?
The steel price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026