Super Duplex 2507 PlateASTM A240 UNS S32750 · Manufacturer, stockist & exporter, India
Also sold as UNS S32750 · W.Nr 1.4410 · F53 · SAF 2507
Super Duplex 2507 plate is Super Duplex 2507 (UNS S32750) rolled to 3/16" (4.76 mm) thickness and above for pressure parts, heavy sections and cut blanks under ASTM A240. It is a super duplex stainless steel, chosen for seawater and high-chloride service where strength also matters. Kanak Steel & Engineering Co. supplies it with EN 10204 3.1 mill certificates from Mumbai to buyers across India, the Gulf, South-East Asia, South America, Europe, the UK and the USA.
- Stock & mill supply
- EN 10204 3.1 / 3.2
- PMI on request
- NACE MR0175 on request
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is Super Duplex 2507 Plate?
Super Duplex 2507 plate is a super duplex stainless steel supplied as plate to ASTM A240 (UNS S32750). Buyers specify it for seawater and high-chloride service where strength also matters. It is also sold as UNS S32750, W.Nr 1.4410, F53.
- What it is
- Super duplex stainless steel
- Standard
- ASTM A240
- Thickness
- 3/16" (4.76 mm) and above
- Density
- 7.8 g/cm³
- Supplied as
- Annealed · HRAP · cut to size
- Best at
- Seawater and high-chloride service where strength also matters
Super Duplex 2507 Plate Specification & Sizes
| Material standard | ASTM A240 · ASME SA-240 |
|---|---|
| General requirements | ASTM A480 — dimensions, tolerances and finishes |
| Grade | Super Duplex 2507 · UNS S32750 · W.Nr 1.4410 |
| Thickness | 3/16" (4.76 mm) and above — thinner is sheet |
| Width × length | 1000 / 1250 / 1500 / 2000 / 2500 mm × up to 6000 mm, or cut to drawing |
| Condition & finish | Annealed · hot rolled, annealed & pickled (No.1) |
| Cutting | Cut to size — rectangles, strips, circles & rings |
| Testing | PMI · UT (plate) · intergranular corrosion · hardness, on request |
| Documents | EN 10204 3.1 · 3.2 with third-party inspection · packing list · certificate of origin |
Sheet or plate?
Both are ordered under ASTM A240, so buyers often mix them up. The line is thickness: below 3/16" is sheet, 3/16" and over is plate. If your drawing calls for under 3/16" (4.76 mm), you need Super Duplex 2507 sheet; for 4.76 mm and up, you are in the right place.
Super Duplex 2507 Plate Cut to Size
Most 2507 plate leaves us as pieces, not full mill plates. Cutting from a full plate means you pay only for what you use, and each piece keeps the heat number of the plate it came from.
| Full & part plates | Full mill plates, halves and quarters |
|---|---|
| Rectangles & strips | To your list of finished sizes, or to a drawing |
| Circles & rings | Blanks for blind flanges, covers, tube sheets and nozzles |
| Machining allowance | State finished size and allowance; thermally cut edges are normally machined back |
| Traceability | Heat number transferred to every piece before cutting |
Send a cutting list or DXF; we nest pieces to reduce off-cut and quote per piece.
Super Duplex 2507 Plate Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Nickel | As specified |
| Molybdenum | As specified |
| Nitrogen | As specified |
| Copper | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Phosphorus | As specified |
| Sulphur | As specified |
| Iron | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS S32750.
Super Duplex 2507 Plate Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS S32750 — Solution-annealed plate & sheet.
Density & Physical Properties
| Property | Value |
|---|---|
| Density | 7.8 g/cm³ |
| Melting range | 1350 – 1400 °C |
| Magnetic | Magnetic (ferritic phase) |
| PREN (approx.) | ≈ 42 |
Super Duplex 2507 Equivalent Grades
Super Duplex 2507 Plate Weight Chart & Calculator
Use this to budget freight and price per piece. Weight (kg) = length (m) × width (m) × thickness (mm) × 7.8.
Example: 2000 × 1000 × 10 mm
2.0 × 1.0 × 10 × 7.8 = 156.0 kg
Total weight —
| Thickness | 2000 × 1000 plate | Per m² |
|---|---|---|
| 5 mm | 78.0 kg | 39.0 kg |
| 6 mm | 93.6 kg | 46.8 kg |
| 8 mm | 124.8 kg | 62.4 kg |
| 10 mm | 156.0 kg | 78.0 kg |
| 12 mm | 187.2 kg | 93.6 kg |
| 16 mm | 249.6 kg | 124.8 kg |
| 20 mm | 312.0 kg | 156.0 kg |
| 25 mm | 390.0 kg | 195.0 kg |
Six-digit Harmonized System heading (iron and steel, chapter 72–73). Your country adds its own digits — confirm with your customs broker. All HS codes.
How to Verify Super Duplex 2507 Plate with PMI
Positive material identification with a handheld XRF gun confirms the alloy on the piece itself, in seconds, before it is cut or welded. Super Duplex 2507 is most often mixed up with Duplex 2205 — the table shows which elements tell them apart.
Handheld XRF does not measure carbon or nitrogen, so it cannot confirm the nitrogen that duplex depends on: that comes from the mill certificate or optical emission (OES) testing. PMI can be arranged on request — state it on your enquiry.
Under technical review for TDS.
| Element | Super Duplex 2507 | Duplex 2205 |
|---|---|---|
| Nickel | As specified | As specified |
| Chromium | As specified | As specified |
| Molybdenum | As specified | As specified |
| Copper | As specified | — |
| Iron | As specified | As specified |
| Manganese | As specified | As specified |
Super Duplex 2507 Plate Price — What Decides It
Two quotes for "2507 plate" can differ by 20% and both be fair. We quote 2507 plate per kg for full sizes and per piece for cut sizes. These six things move the price per kg, so you can compare offers like for like.
Super Duplex 2507 Plate Testing & Inspection
Plate goes into pressure parts and heavy sections, so it is inspected for internal soundness and flatness as well as chemistry. These tests are added to the order and reported on the certificate or as separate reports.
| Ultrasonic testing | Straight-beam UT to ASTM A578 (levels A, B or C; plate 10 mm and over) or EN 10160 (S0–S3 body, E0–E4 edge classes) |
|---|---|
| Flatness & dimensions | Per ASTM A480 tables for thickness, width and length |
| Corrosion testing | ASTM A923 (detrimental intermetallic phases) and G48 (pitting) where specified |
| PMI | Alloy verification on each plate, or each cut piece if required |
| Third-party inspection | Witness by your inspector or agency, with an EN 10204 3.2 certificate |
UT checks the plate body along a scan grid and a band along each edge, where laminations matter most for welding.
Super Duplex 2507 Plate Applications
Plate is chosen for pressure-bearing walls, heavy sections and parts machined from solid. For linings, bellows and pressed parts, see Super Duplex 2507 sheet.
Super Duplex 2507 Plate vs 2205, 625 and C276
| Grade | Plate standard | PREN (approx.) | Pick it when |
|---|---|---|---|
| Duplex 2205 | ASTM A240 | ≈ 35 | Strength with chloride resistance at a stainless-steel budget |
| Super Duplex 2507 | ASTM A240 | ≈ 42 | Seawater and high-chloride service where strength also matters |
| Inconel 625 | ASTM B443 | ≈ 51 | Seawater, high strength and high temperature in one alloy |
| Hastelloy C276 | ASTM B575 | ≈ 68 | The most aggressive mixed acids, wet chlorine and hypochlorite |
PREN = Cr + 3.3 Mo + 16 N, from mid-range chemistry. A screening guide, not a substitute for corrosion data on your medium.
Super Duplex 2507 Corrosion Resistance — Element by Element
Each alloying addition has a job. Knowing which one protects against your medium is the quickest way to judge whether 2507 fits.
High chromium, molybdenum and nitrogen put PREN above 40 — the usual threshold for seawater service.
Much higher yield strength than 316L.
Excellent resistance to chloride stress-corrosion cracking.
Keep service below about 250 °C.
How your 2507 plate order runs
- 01Enquiry review — we confirm size, standard edition and documents against your MR or drawing.
- 02Heat selection & PMI — the mill certificate is checked against your order; PMI before processing is available on request.
- 03Processing — cutting to your sizes, with heat numbers transferred to every piece.
- 04Inspection — your third-party inspector witnesses, or we share photos and test reports.
- 05Packing & dispatch — seaworthy packing from Nhava Sheva (JNPT), Mumbai, FOB or CIF, documents sent before the vessel sails.
Standards on this page
Fabricating Heavy Super Duplex 2507 Plate
Shells, heads and tube sheets mean thick sections and multi-pass welds. These are the points that decide whether 2507 plate keeps its corrosion resistance after fabrication; matching filler is ER2594 (AWS A5.9).
General guidance only; follow your approved WPS, PQR and design code.
| Heat input & interpass | Control both to your duplex WPS — typically 150 °C interpass for 2205 and 100 °C for super duplex. |
|---|---|
| Joint preparation | Slightly wider root gap than for austenitic grades helps full penetration. |
| Post-weld | No PWHT; pickle weld zones. Test ferrite content if your specification calls for it. |
| Machining | Higher strength means more cutting force; use rigid set-ups. |
How to Order Super Duplex 2507 Plate: RFQ Checklist
Get an accurate quote the first time. Copy this list into your enquiry:
- Standard and edition — e.g. ASTM A240-latest
- Thickness × width × length, and number of pieces
- Full plates or cut pieces (attach drawing)
- Certificate type — 3.1 or 3.2, and the inspection agency
- Extra tests — NACE, UT, intergranular corrosion
- Delivery port, Incoterm and required date
Super Duplex 2507 plate for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiSuper Duplex 2507 plate — questions buyers ask
Is Super Duplex 2507 the same as UNS S32750?
UNS S32750, W.Nr 1.4410, F53 are names used for Super Duplex 2507 (W.Nr / EN numbers and older UNS variants are the closest designations; their limits can differ slightly, so specify the UNS number and ASTM grade on the order), and plate is ordered to ASTM A240 whichever name is on the enquiry.
What thickness counts as Super Duplex 2507 plate?
Under ASTM A240 and its general-requirements standard, flat material below 3/16" (4.76 mm) is sheet (or strip if narrower than 24") and 3/16" (4.76 mm) and over is plate. Order the form that matches your drawing thickness.
What is the price of Super Duplex 2507 plate per kg?
It moves with nickel on the LME, so a fixed list price is out of date within days. Thickness, cut size, quantity and documents also change it. Send your size and quantity and we quote the same working day.
Do you supply ultrasonically tested Super Duplex 2507 plate?
Yes, UT can be added to the order — to ASTM A578 or the level your specification states. The UT report is supplied with the mill certificate.
Can Super Duplex 2507 plate be cut into circles and rings?
Yes. Blanks for blind flanges, covers and tube sheets are cut from plate to your drawing, with the heat number marked on every piece.
What machining allowance should I leave on cut plate?
It depends on the cutting method and finished tolerance. Give us the finished size and your allowance; thermally cut edges are normally machined back to sound metal.
How heavy is a Super Duplex 2507 plate?
Weight (kg) = length (m) × width (m) × thickness (mm) × 7.8. A 2000 × 1000 × 10 mm plate weighs about 156 kg; use the calculator on this page for your size.
What documents come with an export shipment?
An EN 10204 3.1 mill certificate (or 3.2 with a third-party inspector), commercial invoice, packing list with heat numbers, and certificate of origin. Test reports are added for any extra tests ordered.
Can Super Duplex 2507 plate be supplied to NACE MR0175?
Super Duplex 2507 is covered by NACE MR0175 / ISO 15156-3 within the environmental limits, heat-treatment conditions and hardness limits that standard sets for it. State the requirement on the order so that condition and hardness are verified and reported on the certificate.
Super Duplex 2507 or Hastelloy C276 — which should I choose?
Super Duplex 2507 is chosen for seawater and high-chloride service where strength also matters. Hastelloy C276 is the step up when you need more pitting resistance or strength. See the comparison table on this page, or ask us with your process conditions.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026