Monel K500 — Fasteners & Flanges
Also sold as Alloy K-500 · UNS N05500 · W.Nr 2.4375 · Age-hardened Monel
Monel K500 is a age-hardenable nickel–copper alloy with aluminium and titanium, chosen for high-strength pump shafts, bolting and springs in seawater. We supply it as fasteners, flanges, with EN 10204 3.1 certificates, from Mumbai to India, the Gulf, South-East Asia, South America, Europe, the UK and the USA.
- UNS N05500
- W.Nr 2.4375
- ρ 8.44 g/cm³
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
Monel K500 Products
Monel K500 Names, Designations & Composition
Monel K500 is one alloy sold under several names. Its UNS number is N05500, the European material number is W.Nr 2.4375 and the EN name is NiCu30Al. The chart on the right shows the specified range of each main alloying element; the balance is the base metal.
Monel K500 Specifications by Product — Which Standard Applies?
The material standard changes with the product form. This is the table buyers ask for most.
| Product | Material standard | Dimensions |
|---|---|---|
| Monel K500 fasteners | ASTM F468 (N05500) where specified for applicable bolts, hex cap screws, socket-head cap screws and studs (0.250–1.500 in.), and ASTM F467 for applicable nuts (0.250–1.500 in.); for other types, material may be supplied to ASTM B865 bar where applicable, subject to the purchase specification | ASME B18.2.1 · B18.2.2 |
| Monel K500 flanges | project / purchase specification dependent | ASME B16.5 · B16.47 |
Monel K500 Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel (+Co) | As specified |
| Copper | As specified |
| Aluminium | As specified |
| Titanium | As specified |
| Iron | As specified |
| Manganese | As specified |
| Carbon | As specified |
| Silicon | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM B865 for UNS N05500.
Monel K500 Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM B865 for UNS N05500 — Age-hardened bar.
Density & Physical Properties
| Property | Value |
|---|---|
| Density | 8.44 g/cm³ |
| Melting range | 1315 – 1350 °C |
| Magnetic | Non-magnetic to about −100 °C |
Monel K500 Equivalent Grades
Monel K500 Corrosion Resistance — What Each Element Does
Aluminium and titanium let K500 be age-hardened to about three times the strength of Monel 400.
Keeps the seawater corrosion resistance of Monel 400.
Chosen where a part needs strength and seawater resistance together.
In sour service, check hardness limits in NACE MR0175 before specifying.
Where Is Monel K500 Used? Applications
Monel K500 vs 400, 718 and 2507
| Grade | PREN (approx.) | Pick it for |
|---|---|---|
| Monel 400 | — | Seawater, hydrofluoric acid and marine service |
| Inconel 718 | — | Very high strength at temperatures up to about 650 °C |
| Monel K500 | — | High-strength pump shafts, bolting and springs in seawater |
| Super Duplex 2507 | ≈ 42 | Seawater and high-chloride service where strength also matters |
Welding Monel K500
| Matching filler | ERNiCu-7 (non-ageing) |
|---|---|
| Also used | Weld in the annealed condition, then age |
Monel K500 for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiMonel K500 — questions buyers ask
What is Monel K500?
Monel K500 is a age-hardenable nickel–copper alloy with aluminium and titanium. It is chosen for high-strength pump shafts, bolting and springs in seawater.
Which standards cover Monel K500 products?
Fasteners: ASTM F468 (N05500) where specified for applicable bolts, hex cap screws, socket-head cap screws and studs (0.250–1.500 in.), and ASTM F467 for applicable nuts (0.250–1.500 in.); for other types, material may be supplied to ASTM B865 bar where applicable, subject to the purchase specification; Flanges: project / purchase specification dependent. Always name the standard and edition on your order.
What is the UNS number of Monel K500?
UNS N05500, with the European material number W.Nr 2.4375.
What is the density of Monel K500?
8.44 g/cm³ — use it to calculate weights: plate kg = L(m) × W(m) × t(mm) × 8.44.
Monel K500 or Super Duplex 2507?
Monel K500 suits high-strength pump shafts, bolting and springs in seawater; Super Duplex 2507 is the step up for seawater and high-chloride service where strength also matters.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026