Incoloy 800 / 800H / 800HT — Sheet, Plate, Coil, Pipe & Tube & Fittings
Also sold as Alloy 800 · UNS N08800 / N08810 / N08811 · W.Nr 1.4876 · Incoloy 800H
Incoloy 800 / 800H / 800HT is a nickel–iron–chromium alloy for high-temperature service, chosen for furnaces, petrochemical heaters and high-temperature piping. We supply it as sheet, plate, coil, pipe & tube, fittings, flanges, fasteners, with EN 10204 3.1 certificates, from Mumbai to India, the Gulf, South-East Asia, South America, Europe, the UK and the USA.
- UNS N08800
- W.Nr 1.4876
- ρ 7.94 g/cm³
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
Incoloy 800 / 800H / 800HT Products
Incoloy 800 / 800H / 800HT Names, Designations & Composition
Incoloy 800 / 800H / 800HT is one alloy sold under several names. Its UNS number is N08800, the European material number is W.Nr 1.4876 and the EN name is X10NiCrAlTi32-21. The chart on the right shows the specified range of each main alloying element; the balance is the base metal.
Incoloy 800 / 800H / 800HT Specifications by Product — Which Standard Applies?
The material standard changes with the product form. This is the table buyers ask for most.
| Product | Material standard | Dimensions |
|---|---|---|
| Incoloy 800 / 800H / 800HT sheet | ASTM B409 | ASTM A480 / B906 |
| Incoloy 800 / 800H / 800HT plate | ASTM B409 | ASTM A480 / B906 / A20 |
| Incoloy 800 / 800H / 800HT coil | ASTM B409 | ASTM A480 |
| Incoloy 800 / 800H / 800HT pipe & tube | ASTM B407 · ASTM B514 | ASME B36.19 / B36.10 |
| Incoloy 800 / 800H / 800HT fittings | ASTM B366 WPNIC · ASTM B564 | ASME B16.9 · B16.11 |
| Incoloy 800 / 800H / 800HT flanges | ASTM B564 | ASME B16.5 · B16.47 |
| Incoloy 800 / 800H / 800HT fasteners | May be machined from ASTM B408 bar (UNS N08800), where applicable; finished fastener requirements are to the purchase specification or project drawing | ASME B18.2.1 · B18.2.2 |
Incoloy 800 / 800H / 800HT Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel | As specified |
| Chromium | As specified |
| Iron | As specified |
| Carbon | As specified |
| Aluminium | As specified |
| Titanium | As specified |
| Copper | As specified |
| Manganese | As specified |
| Silicon | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM B409 for UNS N08800 / N08810.
Incoloy 800 / 800H / 800HT Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM B409 for UNS N08800 / N08810 — Annealed plate.
Density & Physical Properties
| Property | Value |
|---|---|
| Density | 7.94 g/cm³ |
| Melting range | 1357 – 1385 °C |
| Magnetic | Non-magnetic |
Incoloy 800 / 800H / 800HT Equivalent Grades
Incoloy 800 / 800H / 800HT Corrosion Resistance — What Each Element Does
Balanced nickel and chromium resist oxidation and carburisation in furnace atmospheres.
Controlled carbon and coarse grain give 800H/HT their creep-rupture strength above 600 °C.
Aluminium and titanium improve high-temperature strength.
For aqueous acid service choose 825 instead.
Where Is Incoloy 800 / 800H / 800HT Used? Applications
Incoloy 800 / 800H / 800HT vs 310S, 600 and 825
| Grade | PREN (approx.) | Pick it for |
|---|---|---|
| Inconel 600 | — | High-temperature oxidation, caustic and nuclear service |
| Incoloy 800 / 800H / 800HT | — | Furnaces, petrochemical heaters and high-temperature piping |
| SS 310 / 310S | ≈ 25 | Furnaces, burners and heat treatment at high temperature |
| Inconel 825 | ≈ 31 | Sulphuric and phosphoric acid service, chloride stress-corrosion cracking and sour gas |
Welding Incoloy 800 / 800H / 800HT
| Matching filler | ERNiCr-3 (AWS A5.14) |
|---|---|
| Also used | ERNiCrCoMo-1 for creep-critical joints |
Incoloy 800 / 800H / 800HT for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiIncoloy 800 / 800H / 800HT — questions buyers ask
What is Incoloy 800 / 800H / 800HT?
Incoloy 800 / 800H / 800HT is a nickel–iron–chromium alloy for high-temperature service. It is chosen for furnaces, petrochemical heaters and high-temperature piping.
Which standards cover Incoloy 800 / 800H / 800HT products?
Sheet: ASTM B409; Plate: ASTM B409; Coil: ASTM B409; Pipe & Tube: ASTM B407 · ASTM B514; Fittings: ASTM B366 WPNIC · ASTM B564; Flanges: ASTM B564; Fasteners: May be machined from ASTM B408 bar (UNS N08800), where applicable; finished fastener requirements are to the purchase specification or project drawing. Always name the standard and edition on your order.
What is the UNS number of Incoloy 800 / 800H / 800HT?
UNS N08800 · N08810 (800H) · N08811 (800HT), with the European material number W.Nr 1.4876 · 1.4958 · 1.4959.
What is the density of Incoloy 800 / 800H / 800HT?
7.94 g/cm³ — use it to calculate weights: plate kg = L(m) × W(m) × t(mm) × 7.94.
Incoloy 800 / 800H / 800HT or Inconel 825?
Incoloy 800 / 800H / 800HT suits furnaces, petrochemical heaters and high-temperature piping; Inconel 825 is the step up for sulphuric and phosphoric acid service, chloride stress-corrosion cracking and sour gas.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026