Super Duplex S32760 PlateASTM A240 UNS S32760 · Manufacturer, trader & exporter, India
Also sold as UNS S32760 · W.Nr 1.4501 · F55 · Zeron 100
Super Duplex S32760 plate is Super Duplex S32760 (UNS S32760) rolled to 3/16" (4.76 mm) thickness and above for pressure parts, heavy sections and cut blanks under ASTM A240. It is a super duplex stainless steel with copper and tungsten, chosen for seawater firewater, injection and offshore piping. Kanak Steel & Engineering Co. manufactures, trades and exports it from Mumbai; EN 10204 3.1 or 3.2 certificates are available on request / as specified in the PO. Markets we have supplied to include Oman, UAE, Saudi Arabia, Brazil, Argentina, Spain and Chile (India is the home market).
- Stock & mill supply
- EN 10204 3.1 / 3.2
- PMI on request
- NACE MR0175 on request
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is Super Duplex S32760 Plate?
Super Duplex S32760 plate is a super duplex stainless steel with copper and tungsten supplied as plate to ASTM A240 (UNS S32760). Buyers specify it for seawater firewater, injection and offshore piping. It is also sold as UNS S32760, W.Nr 1.4501, F55.
- What it is
- Super duplex stainless steel with copper and tungsten
- Standard
- ASTM A240
- Thickness
- 3/16" (4.76 mm) and above
- Density
- 7.84 g/cm³
- Supplied as
- Annealed · HRAP · cut to size
- Best at
- Seawater firewater, injection and offshore piping
Super Duplex S32760 Plate Specification & Sizes
| Material standard | ASTM A240 · ASME SA-240 |
|---|---|
| General requirements | ASTM A480 — dimensions, tolerances and finishes |
| Grade | Super Duplex S32760 · UNS S32760 · W.Nr 1.4501 |
| Thickness | 3/16" (4.76 mm) and above — thinner is sheet |
| Width × length | 1000 / 1250 / 1500 / 2000 / 2500 mm × up to 6000 mm, or cut to drawing |
| Condition & finish | Annealed · hot rolled, annealed & pickled (No.1) |
| Cutting | Cut to size — rectangles, strips, circles & rings |
| Testing | PMI · UT (plate) · intergranular corrosion · hardness, on request |
| Documents | EN 10204 3.1 · 3.2 with third-party inspection · packing list · certificate of origin |
Sheet or plate?
Both are ordered under ASTM A240, so buyers often mix them up. The line is thickness: below 3/16" is sheet, 3/16" and over is plate. If your drawing calls for under 3/16" (4.76 mm), you need Super Duplex S32760 sheet; for 4.76 mm and up, you are in the right place.
Super Duplex S32760 Plate Cut to Size
Most S32760 plate leaves us as pieces, not full mill plates. Cutting from a full plate means you pay only for what you use, and each piece keeps the heat number of the plate it came from.
| Full & part plates | Full mill plates, halves and quarters |
|---|---|
| Rectangles & strips | To your list of finished sizes, or to a drawing |
| Circles & rings | Blanks for blind flanges, covers, tube sheets and nozzles |
| Machining allowance | State finished size and allowance; thermally cut edges are normally machined back |
| Traceability | Heat number transferred to every piece before cutting |
Send a cutting list or DXF; we nest pieces to reduce off-cut and quote per piece.
Super Duplex S32760 Plate Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Nickel | As specified |
| Molybdenum | As specified |
| Nitrogen | As specified |
| Copper | As specified |
| Tungsten | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Iron | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS S32760.
Super Duplex S32760 Plate Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS S32760 — Solution-annealed plate.
Density & Physical Properties
| Property | Value |
|---|---|
| Density | 7.84 g/cm³ |
| Melting range | 1350 – 1400 °C |
| Magnetic | Magnetic (ferritic phase) |
| PREN (approx.) | ≈ 41 |
Super Duplex S32760 Equivalent Grades
Super Duplex S32760 Plate Weight Chart & Calculator
Use this to budget freight and price per piece. Weight (kg) = length (m) × width (m) × thickness (mm) × 7.84.
Example: 2000 × 1000 × 10 mm
2.0 × 1.0 × 10 × 7.84 = 156.8 kg
Total weight —
| Thickness | 2000 × 1000 plate | Per m² |
|---|---|---|
| 5 mm | 78.4 kg | 39.2 kg |
| 6 mm | 94.1 kg | 47.0 kg |
| 8 mm | 125.4 kg | 62.7 kg |
| 10 mm | 156.8 kg | 78.4 kg |
| 12 mm | 188.2 kg | 94.1 kg |
| 16 mm | 250.9 kg | 125.4 kg |
| 20 mm | 313.6 kg | 156.8 kg |
| 25 mm | 392.0 kg | 196.0 kg |
Six-digit Harmonized System heading (iron and steel, chapter 72–73). Your country adds its own digits — confirm with your customs broker. All HS codes.
How to Verify Super Duplex S32760 Plate with PMI
Positive material identification with a handheld XRF gun confirms the alloy on the piece itself, in seconds, before it is cut or welded. Super Duplex S32760 is most often mixed up with Super Duplex 2507 — the table shows which elements tell them apart.
Handheld XRF does not measure carbon or nitrogen, so it cannot confirm the nitrogen that duplex depends on: that comes from the mill certificate or optical emission (OES) testing. PMI can be arranged on request — state it on your enquiry.
Under technical review for TDS.
| Element | Super Duplex S32760 | Super Duplex 2507 |
|---|---|---|
| Nickel | As specified | As specified |
| Chromium | As specified | As specified |
| Molybdenum | As specified | As specified |
| Copper | As specified | As specified |
| Tungsten | As specified | — |
| Iron | As specified | As specified |
| Manganese | As specified | As specified |
Super Duplex S32760 Plate Price — What Decides It
Two quotes for "S32760 plate" can differ by 20% and both be fair. We quote S32760 plate per kg for full sizes and per piece for cut sizes. These six things move the price per kg, so you can compare offers like for like.
Super Duplex S32760 Plate Testing & Inspection
Plate goes into pressure parts and heavy sections, so it is inspected for internal soundness and flatness as well as chemistry. These tests are added to the order and reported on the certificate or as separate reports.
| Ultrasonic testing | Straight-beam UT to ASTM A578 (levels A, B or C; plate 10 mm and over) or EN 10160 (S0–S3 body, E0–E4 edge classes) |
|---|---|
| Flatness & dimensions | Per ASTM A480 tables for thickness, width and length |
| Corrosion testing | ASTM A923 (detrimental intermetallic phases) and G48 (pitting) where specified |
| PMI | Alloy verification on each plate, or each cut piece if required |
| Third-party inspection | Witness by your inspector or agency, with an EN 10204 3.2 certificate |
UT checks the plate body along a scan grid and a band along each edge, where laminations matter most for welding.
Super Duplex S32760 Plate Applications
Plate is chosen for pressure-bearing walls, heavy sections and parts machined from solid. For linings, bellows and pressed parts, see Super Duplex S32760 sheet.
Super Duplex S32760 Plate vs 2507, 2205 and 625
| Grade | Plate standard | PREN (approx.) | Pick it when |
|---|---|---|---|
| Duplex 2205 | ASTM A240 | ≈ 35 | Strength with chloride resistance at a stainless-steel budget |
| Super Duplex S32760 | ASTM A240 | ≈ 41 | Seawater firewater, injection and offshore piping |
| Super Duplex 2507 | ASTM A240 | ≈ 42 | Seawater and high-chloride service where strength also matters |
| Inconel 625 | ASTM B443 | ≈ 51 | Seawater, high strength and high temperature in one alloy |
PREN = Cr + 3.3 Mo + 16 N, from mid-range chemistry. A screening guide, not a substitute for corrosion data on your medium.
Super Duplex S32760 Corrosion Resistance — Element by Element
Each alloying addition has a job. Knowing which one protects against your medium is the quickest way to judge whether S32760 fits.
Guaranteed PREN of 40 or more for seawater systems.
Copper and tungsten add resistance to sulphuric acid and crevice corrosion.
High yield strength, in the super duplex class.
Keep service below about 250 °C.
How your S32760 plate order runs
- 01Enquiry review — we confirm size, standard edition and documents against your MR or drawing.
- 02Heat selection & PMI — the mill certificate is checked against your order; PMI can be arranged depending on product and requirements, as specified in the PO.
- 03Processing — cutting to your sizes, with heat numbers transferred where the PO requires it.
- 04Inspection — your third-party inspector witnesses, or we share photos and test reports.
- 05Packing & dispatch — seaworthy packing from Nhava Sheva (JNPT), Mumbai, FOB or CIF, documents sent before the vessel sails.
Standards on this page
Fabricating Heavy Super Duplex S32760 Plate
Shells, heads and tube sheets mean thick sections and multi-pass welds. These are the points that decide whether S32760 plate keeps its corrosion resistance after fabrication; matching filler is ER2594 · Zeron 100X.
General guidance only; follow your approved WPS, PQR and design code.
| Heat input & interpass | Control both to your duplex WPS — typically 150 °C interpass for 2205 and 100 °C for super duplex. |
|---|---|
| Joint preparation | Slightly wider root gap than for austenitic grades helps full penetration. |
| Post-weld | No PWHT; pickle weld zones. Test ferrite content if your specification calls for it. |
| Machining | Higher strength means more cutting force; use rigid set-ups. |
How to Order Super Duplex S32760 Plate: RFQ Checklist
Get an accurate quote the first time. Copy this list into your enquiry:
- Standard and edition — e.g. ASTM A240-latest
- Thickness × width × length, and number of pieces
- Full plates or cut pieces (attach drawing)
- Certificate type — 3.1 or 3.2, and the inspection agency
- Extra tests — NACE, UT, intergranular corrosion
- Delivery port, Incoterm and required date
Super Duplex S32760 plate — questions buyers ask
Is Super Duplex S32760 the same as UNS S32760?
UNS S32760, W.Nr 1.4501, F55 are names used for Super Duplex S32760 (W.Nr / EN numbers and older UNS variants are the closest designations; their limits can differ slightly, so specify the UNS number and ASTM grade on the order), and plate is ordered to ASTM A240 whichever name is on the enquiry.
What thickness counts as Super Duplex S32760 plate?
Under ASTM A240 and its general-requirements standard, flat material below 3/16" (4.76 mm) is sheet (or strip if narrower than 24") and 3/16" (4.76 mm) and over is plate. Order the form that matches your drawing thickness.
What is the price of Super Duplex S32760 plate per kg?
It moves with nickel on the LME, so a fixed list price is out of date within days. Thickness, cut size, quantity and documents also change it. Send your size and quantity and we quote the same working day.
Do you supply ultrasonically tested Super Duplex S32760 plate?
Yes, UT can be added to the order — to ASTM A578 or the level your specification states. The UT report is supplied with the mill certificate.
Can Super Duplex S32760 plate be cut into circles and rings?
Yes. Blanks for blind flanges, covers and tube sheets are cut from plate to your drawing, with the heat number marked on every piece.
What machining allowance should I leave on cut plate?
It depends on the cutting method and finished tolerance. Give us the finished size and your allowance; thermally cut edges are normally machined back to sound metal.
How heavy is a Super Duplex S32760 plate?
Weight (kg) = length (m) × width (m) × thickness (mm) × 7.84. A 2000 × 1000 × 10 mm plate weighs about 157 kg; use the calculator on this page for your size.
What documents come with an export shipment?
An EN 10204 3.1 mill certificate (or 3.2 with a third-party inspector), commercial invoice, packing list with heat numbers, and certificate of origin. Test reports are added for any extra tests ordered.
Can Super Duplex S32760 plate be supplied to NACE MR0175?
Super Duplex S32760 (UNS S32760) can be supplied for sour service when the PO specifies NACE MR0175 / ISO 15156; acceptability depends on the material condition, hardness and the environmental limits in that standard, which the purchaser must confirm for the application.
Super Duplex S32760 or Inconel 625 — which should I choose?
Super Duplex S32760 is chosen for seawater firewater, injection and offshore piping. Inconel 625 is the step up when you need more pitting resistance or strength. See the comparison table on this page, or ask us with your process conditions.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026