IS 2062 E250 / E350 SheetIS 2062 E250BR · Manufacturer, stockist & exporter, India
Also sold as IS 2062 E250BR · MS plate · Mild steel plate
IS 2062 E250 / E350 sheet is supplied hot rolled to IS 2062, as full mill sheets or cut to your drawing. It is a Indian-standard structural mild steel, chosen for structures, fabrication and general engineering in India. Kanak Steel & Engineering Co. supplies it with EN 10204 3.1 mill certificates from Mumbai to buyers across India, the Gulf, South-East Asia, South America, Europe, the UK and the USA.
- Stock & mill supply
- EN 10204 3.1 / 3.2
- Mill test certificates
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is IS 2062 E250 / E350 Sheet?
IS 2062 E250 / E350 sheet is an Indian-standard structural mild steel supplied as sheet to IS 2062. Buyers specify it for structures, fabrication and general engineering in India. It is also sold as IS 2062 E250BR, MS plate, Mild steel plate.
- What it is
- Indian-standard structural mild steel
- Standard
- IS 2062
- Thickness
- Below 3/16" (4.76 mm)
- Density
- 7.85 g/cm³
- Supplied as
- Hot rolled · as-rolled or normalised · cut to size
- Best at
- Structures, fabrication and general engineering in India
IS 2062 E250 / E350 Sheet Specification & Sizes
| Material standard | IS 2062 · — |
|---|---|
| General requirements | IS 2062 — dimensions, tolerances and finishes |
| Grade | IS 2062 E250 / E350 |
| Thickness | Below 3/16" (4.76 mm) — thicker is plate |
| Width × length | 1000 / 1219 / 1250 / 1500 mm × 2000 / 2438 / 2500 / 3000 mm, or cut to size |
| Condition & finish | Hot rolled · as-rolled or normalised · shot-blasted and primed on request |
| Cutting | Shearing · laser · slitting to width |
| Testing | Chemical & mechanical per heat · UT to A435 / A578 · impact tests on request |
| Documents | EN 10204 3.1 · 3.2 with third-party inspection · packing list · certificate of origin |
Sheet or plate?
Both are ordered under IS 2062, so buyers often mix them up. The line is thickness: below 3/16" is sheet, 3/16" and over is plate. If your drawing calls for 6 mm or more, you need IS 2062 E250 / E350 plate.
IS 2062 E250 / E350 Sheet Chemical Composition
| Element | Weight % |
|---|---|
| Carbon | 0.22 max (E250) · 0.20 max (E350) |
| Manganese | 1.50 max (E250) · 1.55 max (E350) |
| Silicon | 0.40 max |
| Phosphorus | 0.045 max |
| Sulphur | 0.045 max |
IS 2062 E250 / E350 Sheet Mechanical Properties
| Minimum values | Value |
|---|---|
| Yield strength | 250 MPa (E250) · 350 MPa (E350) |
| Tensile strength | 410 MPa (E250) · 490 MPa (E350) |
| Elongation | 23% (E250) · 22% (E350) |
Density & Physical Properties
| Property | Value |
|---|---|
| Density | 7.85 g/cm³ |
| Melting range | 1420 – 1530 °C |
| Magnetic | Magnetic |
IS 2062 E250 / E350 Equivalent Grades
Values follow IS 2062. Always check against the edition named on your purchase order.
IS 2062 E250 / E350 Sheet Weight Chart & Calculator
Use this to budget freight and price per piece. Weight (kg) = length (m) × width (m) × thickness (mm) × 7.85.
Example: 2500 × 1250 × 2 mm
2.5 × 1.25 × 2 × 7.85 = 49.1 kg
Total weight —
| Thickness | 2500 × 1250 sheet | Per m² |
|---|---|---|
| 0.5 mm | 12.3 kg | 3.9 kg |
| 0.8 mm | 19.6 kg | 6.3 kg |
| 1 mm | 24.5 kg | 7.8 kg |
| 1.2 mm | 29.4 kg | 9.4 kg |
| 1.5 mm | 36.8 kg | 11.8 kg |
| 2 mm | 49.1 kg | 15.7 kg |
| 3 mm | 73.6 kg | 23.5 kg |
| 4 mm | 98.1 kg | 31.4 kg |
IS 2062 E250 / E350 sheet gauge to mm
Gauge numbers are still common on drawings. Weights below use the density of IS 2062 E250 / E350, 7.85 g/cm³.
Full chart: SWG sheet gauge chart.
| SWG | mm | inch | kg/m² (ρ 7.85) |
|---|---|---|---|
| 10 | 3.251 | 0.1280 | 25.52 |
| 11 | 2.946 | 0.1160 | 23.13 |
| 12 | 2.642 | 0.1040 | 20.74 |
| 14 | 2.032 | 0.0800 | 15.95 |
| 16 | 1.626 | 0.0640 | 12.76 |
| 18 | 1.219 | 0.0480 | 9.57 |
| 20 | 0.914 | 0.0360 | 7.17 |
| 22 | 0.711 | 0.0280 | 5.58 |
| 24 | 0.559 | 0.0220 | 4.39 |
Six-digit Harmonized System heading (iron and steel, chapter 72–73). Your country adds its own digits — confirm with your customs broker. All HS codes.
IS 2062 E250 / E350 Sheet Price — What Decides It
Two quotes for "IS 2062 sheet" can differ by 20% and both be fair. We quote IS 2062 sheet per kg for full sizes and per piece for cut sizes. These six things move the price per kg, so you can compare offers like for like.
IS 2062 E250 / E350 Sheet Applications
IS 2062 E250 / E350 is specified when the cheaper grade will not survive the service but a higher alloy would be more than the job needs. These are the jobs our buyers use it for.
How your IS 2062 sheet order runs
- 01Enquiry review — we confirm size, standard edition and documents against your MR or drawing.
- 02Heat selection & PMI — the mill certificate is checked and material is PMI-tested before processing.
- 03Processing — plasma, waterjet or shear cutting, with heat numbers transferred to every piece.
- 04Inspection — your third-party inspector witnesses, or we share photos and test reports.
- 05Packing & dispatch — seaworthy packing from Nhava Sheva (JNPT), Mumbai, FOB or CIF, documents sent before the vessel sails.
Welding & Fabricating IS 2062 E250 / E350 Sheet
IS 2062 E250 / E350 welds by all common arc processes. A few points our buyers ask about:
| Matching filler | E7018 / ER70S-6 |
|---|---|
| Over-alloyed filler | — |
| Preheat | As required by the WPS and code for the thickness |
| Cutting | Plasma or waterjet; grind off heat-tinted edges before welding |
Follow your approved WPS; this is general guidance.
How to Order IS 2062 E250 / E350 Sheet: RFQ Checklist
Get an accurate quote the first time. Copy this list into your enquiry:
- Standard and edition — e.g. IS 2062-latest
- Thickness × width × length, and number of pieces
- Finish (2B, BA, No.4…) and protective film if needed
- Certificate type — 3.1 or 3.2, and the inspection agency
- Extra tests — UT, intergranular corrosion
- Delivery port, Incoterm and required date
IS 2062 E250 / E350 sheet for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiIS 2062 E250 / E350 sheet — questions buyers ask
Is IS 2062 E250 / E350 the same as IS 2062 E250BR?
Yes. IS 2062 E250BR, MS plate, Mild steel plate all refer to the same material, and sheet is ordered to IS 2062 whichever name is on the enquiry.
What thickness counts as IS 2062 E250 / E350 sheet?
Under IS 2062 and its general-requirements standard, flat material below 3/16" (4.76 mm) is sheet (or strip if narrower than 24") and 3/16" (4.76 mm) and over is plate. Order the form that matches your drawing thickness.
What is the price of IS 2062 E250 / E350 sheet per kg?
It moves with steel mill prices, so a fixed list price is out of date within days. Thickness, cut size, quantity and documents also change it. Send your size and quantity and we quote the same working day.
What is the minimum order quantity?
There is no fixed minimum for stock sizes — single sheets or cut pieces are quoted. Mill orders for non-stock thicknesses carry the mill's minimum.
What documents come with an export shipment?
An EN 10204 3.1 mill certificate (or 3.2 with a third-party inspector), commercial invoice, packing list with heat numbers, and certificate of origin. Test reports are added for any extra tests ordered.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026