IS 2062 E250 / E350 CoilIS 2062 E250BR · Manufacturer, stockist & exporter, India
Also sold as IS 2062 E250BR · MS plate · Mild steel plate
IS 2062 E250 / E350 coil is supplied as full-width mother coil, slit coil or precision strip to IS 2062. It is a Indian-standard structural mild steel, chosen for structures, fabrication and general engineering in India. Kanak Steel & Engineering Co. supplies it with EN 10204 3.1 mill certificates from Mumbai to buyers across India, the Gulf, South-East Asia, South America, Europe, the UK and the USA.
- Stock & mill supply
- EN 10204 3.1 / 3.2
- Mill test certificates
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is IS 2062 E250 / E350 Coil?
IS 2062 E250 / E350 coil is an Indian-standard structural mild steel supplied as coil to IS 2062. Buyers specify it for structures, fabrication and general engineering in India. It is also sold as IS 2062 E250BR, MS plate, Mild steel plate.
- What it is
- Indian-standard structural mild steel
- Standard
- IS 2062
- Forms
- Mother coil · slit coil · strip
- Density
- 7.85 g/cm³
- Finish
- Hot rolled · pickled & oiled
- Best at
- Structures, fabrication and general engineering in India
IS 2062 E250 / E350 Coil Specification & Sizes
| Material standard | IS 2062 |
|---|---|
| Grade | IS 2062 E250 / E350 |
| Thickness | 0.1 mm to 6 mm, depending on mill route |
| Width | Mill width, or slit from 10 mm upwards |
| Coil weight & ID | To order — state maximum coil weight and inner diameter |
| Finish | Hot rolled · pickled & oiled |
| Documents | EN 10204 3.1 · 3.2 with third-party inspection |
IS 2062 E250 / E350 Coil: Slitting & Cut-to-Length Specification
IS 2062 coil is bought for a production line, so state thickness, slit width, inner diameter and maximum coil weight with the grade.
| Standard | IS 2062 |
|---|---|
| Thickness tolerance | Per IS 2062 |
| Finish | Hot rolled · pickled & oiled |
ID, coil weight, edge, camber and interleaving: see the coil guide.
IS 2062 E250 / E350 Coil Chemical Composition
| Element | Weight % |
|---|---|
| Carbon | 0.22 max (E250) · 0.20 max (E350) |
| Manganese | 1.50 max (E250) · 1.55 max (E350) |
| Silicon | 0.40 max |
| Phosphorus | 0.045 max |
| Sulphur | 0.045 max |
IS 2062 E250 / E350 Coil Mechanical Properties
| Minimum values | Value |
|---|---|
| Yield strength | 250 MPa (E250) · 350 MPa (E350) |
| Tensile strength | 410 MPa (E250) · 490 MPa (E350) |
| Elongation | 23% (E250) · 22% (E350) |
Density & Physical Properties
| Property | Value |
|---|---|
| Density | 7.85 g/cm³ |
| Melting range | 1420 – 1530 °C |
| Magnetic | Magnetic |
IS 2062 E250 / E350 Equivalent Grades
Values follow IS 2062. Always check against the edition named on your purchase order.
Six-digit Harmonized System heading (iron and steel, chapter 72–73). Your country adds its own digits — confirm with your customs broker. All HS codes.
IS 2062 E250 / E350 Coil Applications
IS 2062 E250 / E350 is specified when the cheaper grade will not survive the service but a higher alloy would be more than the job needs. These are the jobs our buyers use it for.
How your IS 2062 coil order runs
- 01Enquiry review — we confirm size, standard edition and documents against your MR or drawing.
- 02Heat selection & PMI — the mill certificate is checked and material is PMI-tested before processing.
- 03Processing — cutting, machining or bevelling to your specification, with heat numbers marked.
- 04Inspection — your third-party inspector witnesses, or we share photos and test reports.
- 05Packing & dispatch — seaworthy packing from Nhava Sheva (JNPT), Mumbai, FOB or CIF, documents sent before the vessel sails.
Welding & Fabricating IS 2062 E250 / E350 Coil
IS 2062 E250 / E350 welds by all common arc processes. A few points our buyers ask about:
| Matching filler | E7018 / ER70S-6 |
|---|---|
| Over-alloyed filler | — |
| Preheat | As required by the WPS and code for the thickness |
| Cutting | Thermal or abrasive cutting; grind off heat-tinted edges before welding |
Follow your approved WPS; this is general guidance.
How to Order IS 2062 E250 / E350 Coil: RFQ Checklist
Get an accurate quote the first time. Copy this list into your enquiry:
- Thickness and width
- Coil weight and inner diameter
- Finish and edge (mill or slit)
- Certificate type
- Delivery port and date
IS 2062 E250 / E350 coil for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiIS 2062 E250 / E350 coil — questions buyers ask
Is IS 2062 E250 / E350 the same as IS 2062 E250BR?
Yes. IS 2062 E250BR, MS plate, Mild steel plate all refer to the same material, and coil is ordered to IS 2062 whichever name is on the enquiry.
Can IS 2062 E250 / E350 coil be slit to width?
Yes. Coils can be slit to narrow widths for stamping, tube making and spring work; state width tolerance and coil weight on the enquiry.
What inner diameter do IS 2062 E250 / E350 coils have?
508 mm (20") and 610 mm (24") are the common IDs. Tell us your decoiler ID and maximum coil weight and we slit to suit.
Can I order IS 2062 E250 / E350 cut-to-length sheets from coil?
Yes. Coil can be levelled and cut to length; state length tolerance and flatness.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026