IS 2062 E250 / E350 Chequered PlateIS 2062 · Mill standard · Manufacturer, trader & exporter, India
IS 2062 E250BR · MS plate
An IS 2062 E250 / E350 chequered plate is plate with a raised anti-slip pattern, made from IS 2062 E250 / E350 to IS 2062. Chequered plate is used for platforms, walkways, trench covers and ramps.
- IS 2062
- Mill standard
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an IS 2062 E250 / E350 Chequered Plate?
- What it is
- Plate with a raised anti-slip pattern
- Material
- IS 2062
- Dimensions
- Mill standard
- Grade
- IS 2062 E250 / E350
- Best at
- Structures, fabrication and general engineering in India
IS 2062 E250 / E350 Chequered Plate Specification
| Product | IS 2062 E250 / E350 Chequered Plate |
|---|---|
| Material standard | IS 2062 |
| Dimensional standard | Mill standard |
| Thickness | 4.76 mm (3/16") and up |
| Size | Mill plates or cut to drawing |
| Testing | Chemical & mechanical per heat · NDT · impact where specified |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Chequered Plate
Chequered plate is used for platforms, walkways, trench covers and ramps.
- Diamond or lentil pattern
- Anti-slip
- Structural thicknesses
More on choosing: Chequered plate guide.
IS 2062 E250 / E350 Chequered Plate: Why IS 2062 for chequered plates
Chequered plate is used for platforms, walkways, trench covers and ramps. In IS 2062 E250 / E350, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Carbon and low-alloy plate is the workhorse of pressure vessels and structures. IS 2062 E250 / E350 is picked for structures, fabrication and general engineering in India. |
|---|---|
| Typical service | Construction — Structural steelwork. |
| Matching filler | E7018 / ER70S-6 |
IS 2062 E250 / E350 Chequered Plate Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Phosphorus | As specified |
| Sulphur | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: IS 2062.
IS 2062 E250 / E350 Chequered Plate Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Yield strength | As specified |
| Tensile strength | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: IS 2062 — condition per order.
Full chemistry, properties and equivalents are on the IS 2062 E250 / E350 grade page.
Standards on this page
IS 2062 E250 / E350 Chequered Plate — questions buyers ask
What thickness is chequered plate measured at?
At the base plate, excluding the raised pattern.
Which standard covers IS 2062 E250 / E350 chequered plates?
The material is IS 2062; dimensions follow Mill standard. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a IS 2062 E250 / E350 chequered plate?
The steel price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026