S275JR Chequered PlateEN 10025 · Mill standard · Manufacturer, stockist & exporter, India
EN 10025-2 S275JR · W.Nr 1.0044
An S275JR chequered plate is plate with a raised anti-slip pattern, made from S275JR to EN 10025-2. Chequered plate is used for platforms, walkways, trench covers and ramps.
- EN 10025
- Mill standard
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an S275JR Chequered Plate?
- What it is
- Plate with a raised anti-slip pattern
- Material
- EN 10025-2
- Dimensions
- Mill standard
- Grade
- S275JR
- Best at
- General structures, frames and fabrication
S275JR Chequered Plate Specification
| Product | S275JR Chequered Plate |
|---|---|
| Material standard | EN 10025-2 |
| Dimensional standard | Mill standard |
| Thickness | 4.76 mm (3/16") and up |
| Size | Mill plates or cut to drawing |
| Testing | Chemical & mechanical per heat · NDT · impact where specified |
| Documents | EN 10204 3.1 · 3.2 with third-party inspection |
When to Choose a Chequered Plate
Chequered plate is used for platforms, walkways, trench covers and ramps.
- Diamond or lentil pattern
- Anti-slip
- Structural thicknesses
S275JR Chequered Plate Chemical Composition
| Element | Weight % |
|---|---|
| Carbon | 0.21 max (≤16 mm) |
| Manganese | 1.50 max |
| Phosphorus | 0.035 max |
| Sulphur | 0.035 max |
| Copper | 0.55 max |
| Nitrogen | 0.012 max |
S275JR Chequered Plate Mechanical Properties
| Minimum values | Value |
|---|---|
| Yield strength | 275 MPa (≤16 mm) |
| Tensile strength | 410 – 560 MPa |
| Elongation | 23% |
| Charpy impact | 27 J at +20 °C |
Full chemistry, properties and equivalents are on the S275JR grade page.
Standards on this page
S275JR Chequered Plates for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiS275JR Chequered Plate — questions buyers ask
What thickness is chequered plate measured at?
At the base plate, excluding the raised pattern.
Which standard covers S275JR chequered plates?
The material is EN 10025-2; dimensions follow Mill standard. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a S275JR chequered plate?
The steel price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 mill certificates as standard, 3.2 with third-party inspection on request, plus dimensional and PMI reports.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026