S275JR Hot-rolled PlateEN 10025 · ASTM A480 / B906 / A20 · Manufacturer, trader & exporter, India
EN 10025-2 S275JR · W.Nr 1.0044
An S275JR hot-rolled plate is plate rolled at high temperature and annealed or normalised, made from S275JR to EN 10025-2. Hot-rolled plate is the standard plate for vessels, tanks and structures, cut to size as needed.
- EN 10025
- ASTM A480 / B906 / A20
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an S275JR Hot-rolled Plate?
- What it is
- Plate rolled at high temperature and annealed or normalised
- Material
- EN 10025-2
- Dimensions
- ASTM A480 / B906 / A20
- Grade
- S275JR
- Best at
- General structures, frames and fabrication
S275JR Hot-rolled Plate Specification
| Product | S275JR Hot-rolled Plate |
|---|---|
| Material standard | EN 10025-2 |
| Dimensional standard | ASTM A480 / B906 / A20 |
| Thickness | 4.76 mm (3/16") and up |
| Size | Mill plates or cut to drawing |
| Testing | Chemical & mechanical per heat · NDT · impact where specified |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Hot-rolled Plate
Hot-rolled plate is the standard plate for vessels, tanks and structures, cut to size as needed.
- Standard plate route
- Full plates or cut to drawing
- Thickness 4.76 mm and up
More on choosing: Hot-rolled plate guide.
S275JR Hot-rolled Plate: Why S275JR for hot-rolled plates
Hot-rolled plate is the standard plate for vessels, tanks and structures, cut to size as needed. In S275JR, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Carbon and low-alloy plate is the workhorse of pressure vessels and structures. S275JR is picked for general structures, frames and fabrication. |
|---|---|
| Typical service | Construction — Beams, frames and base plates. |
| Matching filler | E7018 / ER70S-6 |
S275JR Hot-rolled Plate Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Carbon | As specified |
| Manganese | As specified |
| Phosphorus | As specified |
| Sulphur | As specified |
| Copper | As specified |
| Nitrogen | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: EN 10025-2 for S275JR.
S275JR Hot-rolled Plate Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Yield strength | As specified |
| Tensile strength | As specified |
| Elongation | As specified |
| Charpy impact | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: EN 10025-2 for S275JR — condition per order.
Full chemistry, properties and equivalents are on the S275JR grade page.
S275JR Hot-rolled Plate — questions buyers ask
Is hot-rolled plate suitable for pressure vessels?
Yes, when supplied to the pressure-vessel specification and certified accordingly.
Which standard covers S275JR hot-rolled plates?
The material is EN 10025-2; dimensions follow ASTM A480 / B906 / A20. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a S275JR hot-rolled plate?
The steel price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026