S355J2+N Chequered PlateEN 10025 · Mill standard · Manufacturer, trader & exporter, India
EN 10025-2 S355J2+N · W.Nr 1.0577
An S355J2+N chequered plate is plate with a raised anti-slip pattern, made from S355J2+N to EN 10025-2. Chequered plate is used for platforms, walkways, trench covers and ramps.
- EN 10025
- Mill standard
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an S355J2+N Chequered Plate?
- What it is
- Plate with a raised anti-slip pattern
- Material
- EN 10025-2
- Dimensions
- Mill standard
- Grade
- S355J2+N
- Best at
- Heavy structures, cranes and offshore frames
S355J2+N Chequered Plate Specification
| Product | S355J2+N Chequered Plate |
|---|---|
| Material standard | EN 10025-2 |
| Dimensional standard | Mill standard |
| Thickness | 4.76 mm (3/16") and up |
| Size | Mill plates or cut to drawing |
| Testing | Chemical & mechanical per heat · NDT · impact where specified |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Chequered Plate
Chequered plate is used for platforms, walkways, trench covers and ramps.
- Diamond or lentil pattern
- Anti-slip
- Structural thicknesses
More on choosing: Chequered plate guide.
S355J2+N Chequered Plate: Why S355J2+N for chequered plates
Chequered plate is used for platforms, walkways, trench covers and ramps. In S355J2+N, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Carbon and low-alloy plate is the workhorse of pressure vessels and structures. S355J2+N is picked for heavy structures, cranes and offshore frames. |
|---|---|
| Typical service | Heavy structures — Bridges, cranes and towers. |
| Matching filler | E7018 / ER70S-6 |
S355J2+N Chequered Plate Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Phosphorus | As specified |
| Sulphur | As specified |
| Copper | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: EN 10025-2 for S355J2.
S355J2+N Chequered Plate Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Yield strength | As specified |
| Tensile strength | As specified |
| Elongation | As specified |
| Charpy impact | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: EN 10025-2 for S355J2 — Normalised (+N).
Full chemistry, properties and equivalents are on the S355J2+N grade page.
Standards on this page
S355J2+N Chequered Plate — questions buyers ask
What thickness is chequered plate measured at?
At the base plate, excluding the raised pattern.
Which standard covers S355J2+N chequered plates?
The material is EN 10025-2; dimensions follow Mill standard. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a S355J2+N chequered plate?
The steel price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026