SS 310 / 310S Cold-rolled PlateASTM A240 · ASTM A480 · Manufacturer, trader & exporter, India
AISI 310S · UNS S31008
An SS 310 / 310S cold-rolled plate is thinner plate finished by cold rolling, made from SS 310 / 310S to ASTM A240. Cold-rolled plate has tighter thickness tolerance and a smoother surface than hot-rolled.
- ASTM A240
- ASTM A480
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an SS 310 / 310S Cold-rolled Plate?
- What it is
- Thinner plate finished by cold rolling
- Material
- ASTM A240
- Dimensions
- ASTM A480
- Grade
- SS 310 / 310S · UNS S31008
- Best at
- Furnaces, burners and heat treatment at high temperature
SS 310 / 310S Cold-rolled Plate Specification
| Product | SS 310 / 310S Cold-rolled Plate |
|---|---|
| Material standard | ASTM A240 |
| Dimensional standard | ASTM A480 |
| Thickness | 4.76 mm (3/16") and up |
| Size | Mill plates or cut to drawing |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Cold-rolled Plate
Cold-rolled plate has tighter thickness tolerance and a smoother surface than hot-rolled.
- Tighter tolerances
- Smoother surface
- Thinner gauges
More on choosing: Cold-rolled plate guide.
SS 310 / 310S Cold-rolled Plate: Why 310S for cold-rolled plates
Cold-rolled plate has tighter thickness tolerance and a smoother surface than hot-rolled. In SS 310 / 310S, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Stainless plate goes into vessels and heavy sections. SS 310 / 310S is picked for furnaces, burners and heat treatment at high temperature. |
|---|---|
| Typical service | Furnace parts — Muffles, retorts, radiant tubes and conveyor belts. |
| Matching filler | ER310 (AWS A5.9) |
SS 310 / 310S Cold-rolled Plate Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Nickel | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Phosphorus | As specified |
| Sulphur | As specified |
| Iron | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS S31008.
SS 310 / 310S Cold-rolled Plate Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS S31008 — Annealed plate & sheet.
Full chemistry, properties and equivalents are on the SS 310 / 310S grade page.
SS 310 / 310S Cold-rolled Plate — questions buyers ask
When is cold-rolled plate chosen?
Where surface finish and thickness tolerance matter more than cost.
Which standard covers SS 310 / 310S cold-rolled plates?
The material is ASTM A240; dimensions follow ASTM A480. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a SS 310 / 310S cold-rolled plate?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026