SS 304L Cold-rolled PlateASTM A240 · ASTM A480 · Manufacturer, trader & exporter, India
AISI 304L · UNS S30403
An SS 304L cold-rolled plate is thinner plate finished by cold rolling, made from SS 304L to ASTM A240. Cold-rolled plate has tighter thickness tolerance and a smoother surface than hot-rolled.
- ASTM A240
- ASTM A480
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an SS 304L Cold-rolled Plate?
- What it is
- Thinner plate finished by cold rolling
- Material
- ASTM A240
- Dimensions
- ASTM A480
- Grade
- SS 304L · UNS S30403
- Best at
- Welded tanks, piping and vessels in general corrosive service
SS 304L Cold-rolled Plate Specification
| Product | SS 304L Cold-rolled Plate |
|---|---|
| Material standard | ASTM A240 |
| Dimensional standard | ASTM A480 |
| Thickness | 4.76 mm (3/16") and up |
| Size | Mill plates or cut to drawing |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Cold-rolled Plate
Cold-rolled plate has tighter thickness tolerance and a smoother surface than hot-rolled.
- Tighter tolerances
- Smoother surface
- Thinner gauges
More on choosing: Cold-rolled plate guide.
SS 304L Cold-rolled Plate: Why 304L for cold-rolled plates
Cold-rolled plate has tighter thickness tolerance and a smoother surface than hot-rolled. In SS 304L, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Stainless plate goes into vessels and heavy sections. SS 304L is picked for welded tanks, piping and vessels in general corrosive service. |
|---|---|
| Typical service | Process piping — Welded lines in chemical and pharma plants. |
| Matching filler | ER308L (AWS A5.9) |
SS 304L Cold-rolled Plate Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Nickel | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Nitrogen | As specified |
| Phosphorus | As specified |
| Sulphur | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS S30403.
SS 304L Cold-rolled Plate Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS S30403 — Annealed plate & sheet.
Full chemistry, properties and equivalents are on the SS 304L grade page.
SS 304L Cold-rolled Plate — questions buyers ask
When is cold-rolled plate chosen?
Where surface finish and thickness tolerance matter more than cost.
Which standard covers SS 304L cold-rolled plates?
The material is ASTM A240; dimensions follow ASTM A480. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a SS 304L cold-rolled plate?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026