Inconel 825 Cold-rolled PlateASTM B424 · ASTM A480 · Manufacturer, trader & exporter, India
Incoloy 825 · Alloy 825
An Inconel 825 cold-rolled plate is thinner plate finished by cold rolling, made from Inconel 825 to ASTM B424. Cold-rolled plate has tighter thickness tolerance and a smoother surface than hot-rolled.
See the Inconel 825 plate grade form page for standards and sizes.
- ASTM B424
- ASTM A480
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Inconel 825 Cold-rolled Plate?
- What it is
- Thinner plate finished by cold rolling
- Material
- ASTM B424
- Dimensions
- ASTM A480
- Grade
- Inconel 825 · UNS N08825
- Best at
- Sulphuric and phosphoric acid service, chloride stress-corrosion cracking and sour gas
Inconel 825 Cold-rolled Plate Specification
| Product | Inconel 825 Cold-rolled Plate |
|---|---|
| Material standard | ASTM B424 |
| Dimensional standard | ASTM A480 |
| Thickness | 4.76 mm (3/16") and up |
| Size | Mill plates or cut to drawing |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Cold-rolled Plate
Cold-rolled plate has tighter thickness tolerance and a smoother surface than hot-rolled.
- Tighter tolerances
- Smoother surface
- Thinner gauges
More on choosing: Cold-rolled plate guide.
Inconel 825 Cold-rolled Plate: Why 825 for cold-rolled plates
Cold-rolled plate has tighter thickness tolerance and a smoother surface than hot-rolled. In Inconel 825, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy plate goes into vessels and tube sheets in aggressive media. Inconel 825 is picked for sulphuric and phosphoric acid service, chloride stress-corrosion cracking and sour gas. |
|---|---|
| Typical service | Sulphuric & phosphoric acid plants — Tank linings, agitators, heat-exchanger baffles in fertiliser and acid production. |
| Matching filler | ERNiFeCr-1 (AWS A5.14) |
Inconel 825 Cold-rolled Plate Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel | As specified |
| Iron | As specified |
| Chromium | As specified |
| Molybdenum | As specified |
| Copper | As specified |
| Titanium | As specified |
| Carbon | As specified |
| Manganese | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM B424 / B423 / B564 for UNS N08825.
Inconel 825 Cold-rolled Plate Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM B424 / B423 / B564 for UNS N08825 — Annealed.
Full chemistry, properties and equivalents are on the Inconel 825 grade page.
Inconel 825 Cold-rolled Plate — questions buyers ask
When is cold-rolled plate chosen?
Where surface finish and thickness tolerance matter more than cost.
Which standard covers Inconel 825 cold-rolled plates?
The material is ASTM B424; dimensions follow ASTM A480. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Inconel 825 cold-rolled plate?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026