IS 2062 E250 / E350 Slit CoilIS 2062 · ASTM A480 · Manufacturer, trader & exporter, India
IS 2062 E250BR · MS plate
An IS 2062 E250 / E350 slit coil is coil slit to narrower widths, made from IS 2062 E250 / E350 to IS 2062. Slit coils feed stamping, roll forming and tube mills. State width, tolerance and coil weight.
- IS 2062
- ASTM A480
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an IS 2062 E250 / E350 Slit Coil?
- What it is
- Coil slit to narrower widths
- Material
- IS 2062
- Dimensions
- ASTM A480
- Grade
- IS 2062 E250 / E350
- Best at
- Structures, fabrication and general engineering in India
IS 2062 E250 / E350 Slit Coil Specification
| Product | IS 2062 E250 / E350 Slit Coil |
|---|---|
| Material standard | IS 2062 |
| Dimensional standard | ASTM A480 |
| Thickness | 0.1 – 6 mm by route |
| Width | Mill width or slit to order |
| Testing | Chemical & mechanical per heat · NDT · impact where specified |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Slit Coil
Slit coils feed stamping, roll forming and tube mills. State width, tolerance and coil weight.
- Slit to width
- Burr-controlled edges
- Coil weight to order
More on choosing: Slit coil guide.
IS 2062 E250 / E350 Slit Coil: Why IS 2062 for slit coils
Slit coils feed stamping, roll forming and tube mills. State width, tolerance and coil weight. In IS 2062 E250 / E350, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Carbon steel coil feeds general fabrication. IS 2062 E250 / E350 is picked for structures, fabrication and general engineering in India. |
|---|---|
| Typical service | Construction — Structural steelwork. |
IS 2062 E250 / E350 Slit Coil Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Phosphorus | As specified |
| Sulphur | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: IS 2062.
IS 2062 E250 / E350 Slit Coil Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Yield strength | As specified |
| Tensile strength | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: IS 2062 — condition per order.
Full chemistry, properties and equivalents are on the IS 2062 E250 / E350 grade page.
Other IS 2062 E250 / E350 coils
IS 2062 E250 / E350 Slit Coil — questions buyers ask
What width tolerance can slit coil hold?
Typically ±0.1 to ±0.3 mm depending on thickness and width.
Which standard covers IS 2062 E250 / E350 slit coils?
The material is IS 2062; dimensions follow ASTM A480. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a IS 2062 E250 / E350 slit coil?
The steel price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026