S355J2+N Slit CoilEN 10025 · ASTM A480 · Manufacturer, stockist & exporter, India
EN 10025-2 S355J2+N · W.Nr 1.0577
An S355J2+N slit coil is coil slit to narrower widths, made from S355J2+N to EN 10025-2. Slit coils feed stamping, roll forming and tube mills. State width, tolerance and coil weight.
- EN 10025
- ASTM A480
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an S355J2+N Slit Coil?
- What it is
- Coil slit to narrower widths
- Material
- EN 10025-2
- Dimensions
- ASTM A480
- Grade
- S355J2+N
- Best at
- Heavy structures, cranes and offshore frames
S355J2+N Slit Coil Specification
| Product | S355J2+N Slit Coil |
|---|---|
| Material standard | EN 10025-2 |
| Dimensional standard | ASTM A480 |
| Thickness | 0.1 – 6 mm by route |
| Width | Mill width or slit to order |
| Testing | Chemical & mechanical per heat · NDT · impact where specified |
| Documents | EN 10204 3.1 · 3.2 with third-party inspection |
When to Choose a Slit Coil
Slit coils feed stamping, roll forming and tube mills. State width, tolerance and coil weight.
- Slit to width
- Burr-controlled edges
- Coil weight to order
More on choosing: Slit coil guide.
S355J2+N Slit Coil: Why S355J2+N for slit coils
Slit coils feed stamping, roll forming and tube mills. State width, tolerance and coil weight. In S355J2+N, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Carbon steel coil feeds general fabrication. S355J2+N is picked for heavy structures, cranes and offshore frames. |
|---|---|
| Typical service | Heavy structures — Bridges, cranes and towers. |
S355J2+N Slit Coil Chemical Composition
| Element | Weight % |
|---|---|
| Carbon | 0.20 max (≤16 mm) |
| Manganese | 1.60 max |
| Silicon | 0.55 max |
| Phosphorus | 0.025 max |
| Sulphur | 0.025 max |
| Copper | 0.55 max |
S355J2+N Slit Coil Mechanical Properties
| Normalised (+N) | Value |
|---|---|
| Yield strength | 355 MPa (≤16 mm) |
| Tensile strength | 470 – 630 MPa |
| Elongation | 22% |
| Charpy impact | 27 J at −20 °C |
Full chemistry, properties and equivalents are on the S355J2+N grade page.
Other S355J2+N coils
S355J2+N Slit Coils for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiS355J2+N Slit Coil — questions buyers ask
What width tolerance can slit coil hold?
Typically ±0.1 to ±0.3 mm depending on thickness and width.
Which standard covers S355J2+N slit coils?
The material is EN 10025-2; dimensions follow ASTM A480. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a S355J2+N slit coil?
The steel price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 mill certificates as standard, 3.2 with third-party inspection on request, plus dimensional and PMI reports.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026