Inconel 825 Slit CoilASTM B424 · ASTM A480 · Manufacturer, trader & exporter, India
Incoloy 825 · Alloy 825
An Inconel 825 slit coil is coil slit to narrower widths, made from Inconel 825 to ASTM B424. Slit coils feed stamping, roll forming and tube mills. State width, tolerance and coil weight.
See the Inconel 825 coil grade form page for standards and sizes.
- ASTM B424
- ASTM A480
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Inconel 825 Slit Coil?
- What it is
- Coil slit to narrower widths
- Material
- ASTM B424
- Dimensions
- ASTM A480
- Grade
- Inconel 825 · UNS N08825
- Best at
- Sulphuric and phosphoric acid service, chloride stress-corrosion cracking and sour gas
Inconel 825 Slit Coil Specification
| Product | Inconel 825 Slit Coil |
|---|---|
| Material standard | ASTM B424 |
| Dimensional standard | ASTM A480 |
| Thickness | 0.1 – 6 mm by route |
| Width | Mill width or slit to order |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Slit Coil
Slit coils feed stamping, roll forming and tube mills. State width, tolerance and coil weight.
- Slit to width
- Burr-controlled edges
- Coil weight to order
More on choosing: Slit coil guide.
Inconel 825 Slit Coil: Why 825 for slit coils
Slit coils feed stamping, roll forming and tube mills. State width, tolerance and coil weight. In Inconel 825, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy strip is slit for bellows, springs and precision parts. Inconel 825 is picked for sulphuric and phosphoric acid service, chloride stress-corrosion cracking and sour gas. |
|---|---|
| Typical service | Sulphuric & phosphoric acid plants — Tank linings, agitators, heat-exchanger baffles in fertiliser and acid production. |
Inconel 825 Slit Coil Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel | As specified |
| Iron | As specified |
| Chromium | As specified |
| Molybdenum | As specified |
| Copper | As specified |
| Titanium | As specified |
| Carbon | As specified |
| Manganese | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM B424 / B423 / B564 for UNS N08825.
Inconel 825 Slit Coil Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM B424 / B423 / B564 for UNS N08825 — Annealed.
Full chemistry, properties and equivalents are on the Inconel 825 grade page.
Other Inconel 825 coils
Inconel 825 Slit Coil — questions buyers ask
What width tolerance can slit coil hold?
Typically ±0.1 to ±0.3 mm depending on thickness and width.
Which standard covers Inconel 825 slit coils?
The material is ASTM B424; dimensions follow ASTM A480. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Inconel 825 slit coil?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026