S275JR Slit CoilEN 10025 · ASTM A480 · Manufacturer, stockist & exporter, India
EN 10025-2 S275JR · W.Nr 1.0044
An S275JR slit coil is coil slit to narrower widths, made from S275JR to EN 10025-2. Slit coils feed stamping, roll forming and tube mills. State width, tolerance and coil weight.
- EN 10025
- ASTM A480
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an S275JR Slit Coil?
- What it is
- Coil slit to narrower widths
- Material
- EN 10025-2
- Dimensions
- ASTM A480
- Grade
- S275JR
- Best at
- General structures, frames and fabrication
S275JR Slit Coil Specification
| Product | S275JR Slit Coil |
|---|---|
| Material standard | EN 10025-2 |
| Dimensional standard | ASTM A480 |
| Thickness | 0.1 – 6 mm by route |
| Width | Mill width or slit to order |
| Testing | Chemical & mechanical per heat · NDT · impact where specified |
| Documents | EN 10204 3.1 · 3.2 with third-party inspection |
When to Choose a Slit Coil
Slit coils feed stamping, roll forming and tube mills. State width, tolerance and coil weight.
- Slit to width
- Burr-controlled edges
- Coil weight to order
More on choosing: Slit coil guide.
S275JR Slit Coil: Why S275JR for slit coils
Slit coils feed stamping, roll forming and tube mills. State width, tolerance and coil weight. In S275JR, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Carbon steel coil feeds general fabrication. S275JR is picked for general structures, frames and fabrication. |
|---|---|
| Typical service | Construction — Beams, frames and base plates. |
S275JR Slit Coil Chemical Composition
| Element | Weight % |
|---|---|
| Carbon | 0.21 max (≤16 mm) |
| Manganese | 1.50 max |
| Phosphorus | 0.035 max |
| Sulphur | 0.035 max |
| Copper | 0.55 max |
| Nitrogen | 0.012 max |
S275JR Slit Coil Mechanical Properties
| Minimum values | Value |
|---|---|
| Yield strength | 275 MPa (≤16 mm) |
| Tensile strength | 410 – 560 MPa |
| Elongation | 23% |
| Charpy impact | 27 J at +20 °C |
Full chemistry, properties and equivalents are on the S275JR grade page.
Other S275JR coils
S275JR Slit Coils for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiS275JR Slit Coil — questions buyers ask
What width tolerance can slit coil hold?
Typically ±0.1 to ±0.3 mm depending on thickness and width.
Which standard covers S275JR slit coils?
The material is EN 10025-2; dimensions follow ASTM A480. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a S275JR slit coil?
The steel price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 mill certificates as standard, 3.2 with third-party inspection on request, plus dimensional and PMI reports.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026