Inconel 600 Socket Head Cap ScrewUNS N06600 · ASME B18.3 · Manufacturer, trader & exporter, India
Alloy 600 · UNS N06600
An Inconel 600 socket head cap screw is a screw with a cylindrical head and hexagon socket. Finished fastener specification not asserted; may be machined from ASTM B166 bar (UNS N06600), where applicable; finished fastener requirements are to the purchase specification or project drawing. Allen-type cap screws are used where the head must sit flush or space is tight.
- UNS N06600
- ASME B18.3
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Inconel 600 Socket Head Cap Screw?
- What it is
- A screw with a cylindrical head and hexagon socket
- Finished spec
- Not asserted
- Material / feedstock
- ASTM B166 bar (UNS N06600), where applicable
- Dimensions
- ASME B18.3 · ISO 4762 · DIN 912 (legacy DIN)
- Grade
- Inconel 600 · UNS N06600
- Best at
- High-temperature oxidation, caustic and nuclear service
Inconel 600 Socket Head Cap Screw Specification
| Product | Inconel 600 Socket Head Cap Screw |
|---|---|
| Finished fastener specification | Not asserted |
| Material / feedstock specification | ASTM B166 bar (UNS N06600), where applicable |
| Dimensional standard | ASME B18.3 · ISO 4762 · DIN 912 (legacy DIN) |
| Manufacturing route | May be machined from bar, where applicable |
| Project / purchase specification | Yes — finished fastener requirements are to the purchase specification or project drawing |
| Sizes | M10 – M64 · ½" – 4" (others on request) |
| Threads | UNC · UN-8 · metric coarse |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Socket Head Cap Screw
Allen-type cap screws are used where the head must sit flush or space is tight.
- Hex socket drive
- ASME B18.3 · DIN 912
- Metric and inch
More on choosing: Socket head cap screw guide.
Inconel 600 Socket Head Cap Screw: Why 600 for socket head cap screws
Allen-type cap screws are used where the head must sit flush or space is tight. In Inconel 600, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy fasteners match nickel-alloy flanges in corrosive or hot service. Inconel 600 is picked for high-temperature oxidation, caustic and nuclear service. |
|---|---|
| Typical service | Furnaces & heat treating — Muffles, retorts and radiant tubes. |
| Bolting | B7 (coated), B8M or nickel-alloy studs in Inconel 600 (bar to ASTM B166, where applicable), as the project specifies |
Inconel 600 Socket Head Cap Screw Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel (+Co) | As specified |
| Chromium | As specified |
| Iron | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Copper | As specified |
| Sulphur | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM B168 for UNS N06600.
Inconel 600 Socket Head Cap Screw Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM B168 for UNS N06600 — Annealed plate.
Full chemistry, properties and equivalents are on the Inconel 600 grade page.
Standards on this page
Other Inconel 600 fasteners
Inconel 600 Socket Head Cap Screw — questions buyers ask
DIN 912 and ISO 4762 — are they the same?
Yes, ISO 4762 replaced DIN 912 with the same main dimensions.
What nut is used with Inconel 600 socket head cap screws?
Usually a nut in the same alloy — it may be machined from ASTM B166 bar, where applicable; finished requirements are to the purchase specification or project drawing.
Which standard covers Inconel 600 socket head cap screws?
Finished fastener specification: Not asserted. Material / feedstock: ASTM B166 bar (UNS N06600), where applicable. Dimensions: ASME B18.3 · ISO 4762 · DIN 912 (legacy DIN). State the finished specification, material and dimensions on your purchase order or project drawing.
What decides the price of a Inconel 600 socket head cap screw?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026