Inconel 718 Socket Head Cap ScrewUNS N07718 · ASME B18.3 · Manufacturer, trader & exporter, India
Alloy 718 · UNS N07718
An Inconel 718 socket head cap screw is a screw with a cylindrical head and hexagon socket. Finished fastener specification not asserted (ASTM A1014 coverage of this product type pending current standard text); may be machined from ASTM B637 bar (UNS N07718), where applicable; finished fastener requirements are to the purchase specification or project drawing. Allen-type cap screws are used where the head must sit flush or space is tight.
- UNS N07718
- ASME B18.3
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Inconel 718 Socket Head Cap Screw?
- What it is
- A screw with a cylindrical head and hexagon socket
- Finished spec
- Not asserted
- Material / feedstock
- ASTM B637 bar (UNS N07718), where applicable
- Dimensions
- ASME B18.3 · ISO 4762 · DIN 912 (legacy DIN)
- Grade
- Inconel 718 · UNS N07718
- Best at
- Very high strength at temperatures up to about 650 °C
Inconel 718 Socket Head Cap Screw Specification
| Product | Inconel 718 Socket Head Cap Screw |
|---|---|
| Finished fastener specification | Not asserted |
| Material / feedstock specification | ASTM B637 bar (UNS N07718), where applicable |
| Dimensional standard | ASME B18.3 · ISO 4762 · DIN 912 (legacy DIN) |
| Manufacturing route | May be machined from bar, where applicable |
| Project / purchase specification | Yes — finished fastener requirements are to the purchase specification or project drawing |
| Sizes | M10 – M64 · ½" – 4" (others on request) |
| Threads | UNC · UN-8 · metric coarse |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Socket Head Cap Screw
Allen-type cap screws are used where the head must sit flush or space is tight.
- Hex socket drive
- ASME B18.3 · DIN 912
- Metric and inch
More on choosing: Socket head cap screw guide.
Inconel 718 Socket Head Cap Screw: Why 718 for socket head cap screws
Allen-type cap screws are used where the head must sit flush or space is tight. In Inconel 718, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy fasteners match nickel-alloy flanges in corrosive or hot service. Inconel 718 is picked for very high strength at temperatures up to about 650 °C. |
|---|---|
| Typical service | Oil & gas — Wellhead parts, hangers and high-strength bolting. |
| Bolting | B7 (coated), B8M or nickel-alloy studs in Inconel 718 (bar to ASTM B637, where applicable), as the project specifies |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Inconel 718 Socket Head Cap Screw Chemical Composition
| Element | Weight % (producer reference) |
|---|---|
| Nickel (+Co) | 50.00 – 55.00 |
| Chromium | 17.00 – 21.00 |
| Iron | Balance |
| Niobium (+Ta) | 4.75 – 5.50 |
| Molybdenum | 2.80 – 3.30 |
| Titanium | 0.65 – 1.15 |
| Aluminium | 0.20 – 0.80 |
| Cobalt | 1.00 max |
Inconel 718 Socket Head Cap Screw Mechanical Properties
| Specification | Product form | Condition | Requirement values |
|---|---|---|---|
| ASTM A1014/A1014M (A1014/A1014M-26) | bolting (product types pending) | as specified | As specified |
Numerical requirements are not shown until the current edition of each standard has been verified. Mechanical properties depend on product form, size, condition and heat treatment — state them on the purchase order.
Full chemistry, properties and equivalents are on the Inconel 718 grade page.
Standards on this page
Other Inconel 718 fasteners
Inconel 718 Socket Head Cap Screw — questions buyers ask
DIN 912 and ISO 4762 — are they the same?
Yes, ISO 4762 replaced DIN 912 with the same main dimensions.
What nut is used with Inconel 718 socket head cap screws?
Usually a nut in the same alloy — it may be machined from ASTM B637 bar, where applicable; finished requirements are to the purchase specification or project drawing.
Which standard covers Inconel 718 socket head cap screws?
Finished fastener specification: Not asserted. Material / feedstock: ASTM B637 bar (UNS N07718), where applicable. Dimensions: ASME B18.3 · ISO 4762 · DIN 912 (legacy DIN). State the finished specification, material and dimensions on your purchase order or project drawing.
What decides the price of a Inconel 718 socket head cap screw?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026