Inconel 718 Eye BoltUNS N07718 · Project drawing / purchase specification · Manufacturer, trader & exporter, India
Alloy 718 · UNS N07718
An Inconel 718 eye bolt is a bolt with a loop head for lifting or anchoring. Finished fastener specification not asserted; material/feedstock may be supplied to ASTM B637 (UNS N07718), where applicable; manufacturing route and finished fastener requirements are to the purchase specification or project drawing. Eye bolts provide lifting points on equipment. Load ratings depend on angle of pull.
- UNS N07718
- Project drawing / purchase specification
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Inconel 718 Eye Bolt?
- What it is
- A bolt with a loop head for lifting or anchoring
- Finished spec
- Not asserted
- Material / feedstock
- ASTM B637 (UNS N07718), where applicable
- Dimensions
- Project drawing / purchase specification
- Grade
- Inconel 718 · UNS N07718
- Best at
- Very high strength at temperatures up to about 650 °C
Inconel 718 Eye Bolt Specification
| Product | Inconel 718 Eye Bolt |
|---|---|
| Finished fastener specification | Not asserted |
| Material / feedstock specification | ASTM B637 (UNS N07718), where applicable |
| Dimensional standard | Project drawing / purchase specification |
| Manufacturing route | Route dependent on product design and purchase specification |
| Project / purchase specification | Yes — finished fastener requirements are to the purchase specification or project drawing |
| Sizes | M10 – M64 · ½" – 4" (others on request) |
| Threads | UNC · UN-8 · metric coarse |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose an Eye Bolt
Eye bolts provide lifting points on equipment. Load ratings depend on angle of pull.
- Forged or machined to drawing
- Load rating per design and purchase specification
- Metric and inch
More on choosing: Eye bolt guide.
Inconel 718 Eye Bolt: Why 718 for eye bolts
Eye bolts provide lifting points on equipment. Load ratings depend on angle of pull. In Inconel 718, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy fasteners match nickel-alloy flanges in corrosive or hot service. Inconel 718 is picked for very high strength at temperatures up to about 650 °C. |
|---|---|
| Typical service | Oil & gas — Wellhead parts, hangers and high-strength bolting. |
| Bolting | B7 (coated), B8M or nickel-alloy studs in Inconel 718 (bar to ASTM B637, where applicable), as the project specifies |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Inconel 718 Eye Bolt Chemical Composition
| Element | Weight % (producer reference) |
|---|---|
| Nickel (+Co) | 50.00 – 55.00 |
| Chromium | 17.00 – 21.00 |
| Iron | Balance |
| Niobium (+Ta) | 4.75 – 5.50 |
| Molybdenum | 2.80 – 3.30 |
| Titanium | 0.65 – 1.15 |
| Aluminium | 0.20 – 0.80 |
| Cobalt | 1.00 max |
Inconel 718 Eye Bolt Mechanical Properties
| Specification | Product form | Condition | Requirement values |
|---|---|---|---|
| ASTM A1014/A1014M (A1014/A1014M-26) | bolting (product types pending) | as specified | As specified |
Numerical requirements are not shown until the current edition of each standard has been verified. Mechanical properties depend on product form, size, condition and heat treatment — state them on the purchase order.
Full chemistry, properties and equivalents are on the Inconel 718 grade page.
Standards on this page
Other Inconel 718 fasteners
Inconel 718 Eye Bolt — questions buyers ask
Can eye bolts be loaded at an angle?
Only shouldered eye bolts, and with a reduced rating; follow the load chart.
What nut is used with Inconel 718 eye bolts?
Usually a nut in the same alloy — it may be machined from ASTM B637 bar, where applicable; finished requirements are to the purchase specification or project drawing.
Which standard covers Inconel 718 eye bolts?
Finished fastener specification: Not asserted. Material / feedstock: ASTM B637 (UNS N07718), where applicable. Dimensions: Project drawing / purchase specification. State the finished specification, material and dimensions on your purchase order or project drawing.
What decides the price of a Inconel 718 eye bolt?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026