Inconel 600 SheetASTM B168 UNS N06600 · Manufacturer, stockist & exporter, India
Also sold as Alloy 600 · UNS N06600 · W.Nr 2.4816 · Nicrofer 7216
Inconel 600 sheet is Alloy 600 (UNS N06600) rolled below 3/16" (4.76 mm) thick for formed, pressed and lined parts under ASTM B168. It is a nickel–chromium–iron alloy, chosen for high-temperature oxidation, caustic and nuclear service. Kanak Steel & Engineering Co. supplies it with EN 10204 3.1 mill certificates from Mumbai to buyers across India, the Gulf, South-East Asia, South America, Europe, the UK and the USA.
- Stock & mill supply
- EN 10204 3.1 / 3.2
- PMI on every heat
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is Inconel 600 Sheet?
Inconel 600 sheet is a nickel–chromium–iron alloy supplied as sheet to ASTM B168 (UNS N06600). Buyers specify it for high-temperature oxidation, caustic and nuclear service. It is also sold as Alloy 600, UNS N06600, W.Nr 2.4816.
- What it is
- Nickel–chromium–iron alloy
- Standard
- ASTM B168
- Thickness
- Below 3/16" (4.76 mm)
- Density
- 8.47 g/cm³
- Supplied as
- Annealed · cold rolled, annealed & descaled
- Best at
- High-temperature oxidation, caustic and nuclear service
Inconel 600 Sheet Specification & Sizes
| Material standard | ASTM B168 · ASME SB-168 |
|---|---|
| General requirements | ASTM B906 — dimensions, tolerances and finishes |
| Grade | Inconel 600 · UNS N06600 · W.Nr 2.4816 |
| Thickness | Below 3/16" (4.76 mm) — thicker is plate |
| Width × length | 1000 / 1219 / 1250 / 1500 mm × 2000 / 2438 / 2500 / 3000 mm, or cut to size |
| Condition & finish | Annealed · cold rolled, annealed & descaled |
| Cutting | Cut to size and to width |
| Testing | PMI · UT (plate) · intergranular corrosion · hardness, on request |
| Documents | EN 10204 3.1 · 3.2 with third-party inspection · packing list · certificate of origin |
Sheet or plate?
Both are ordered under ASTM B168, so buyers often mix them up. The line is thickness: below 3/16" is sheet, 3/16" and over is plate. If your drawing calls for 3/16" (4.76 mm) or more, you need Inconel 600 plate.
Inconel 600 Sheet Finishes — Which to Order
Sheet is bought for its surface as much as its chemistry. The finish is set at the mill and cannot be fixed later without polishing cost, so name it on the order. Nickel-alloy finishes are described in words under ASTM B906 rather than by stainless finish numbers.
| Finish | How it is made | Choose it for |
|---|---|---|
| Cold rolled, annealed & descaled | Cold rolled, solution or mill annealed, then pickled | Smooth, uniform matt-to-satin surface. The standard nickel-alloy sheet finish, often called "2B equivalent" in the trade. |
| Bright annealed | Annealed in a protective atmosphere, not pickled | Brighter surface for some thin gauges; confirm availability with the mill. |
| Hot rolled, annealed & descaled | Hot rolled, annealed, then pickled or blasted | Rougher finish on heavier sheet close to the plate boundary. |
Inconel 600 Sheet Chemical Composition
| Element | Weight % |
|---|---|
| Nickel (+Co) | 72.0 min |
| Chromium | 14.0 – 17.0 |
| Iron | 6.0 – 10.0 |
| Carbon | 0.15 max |
| Manganese | 1.0 max |
| Silicon | 0.5 max |
| Copper | 0.5 max |
| Sulphur | 0.015 max |
Inconel 600 Sheet Mechanical Properties
| Annealed plate | Value |
|---|---|
| Tensile strength | 550 MPa · 80 ksi |
| Yield strength 0.2% | 240 MPa · 35 ksi |
| Elongation | 30% |
Density & Physical Properties
| Property | Value |
|---|---|
| Density | 8.47 g/cm³ |
| Melting range | 1354 – 1413 °C |
| Magnetic | Non-magnetic |
Inconel 600 Equivalent Grades
Values follow ASTM B168 for UNS N06600. Always check against the edition named on your purchase order.
Inconel 600 Sheet Weight Chart & Calculator
Use this to budget freight and price per piece. Weight (kg) = length (m) × width (m) × thickness (mm) × 8.47.
Example: 2500 × 1250 × 2 mm
2.5 × 1.25 × 2 × 8.47 = 52.9 kg
Total weight —
| Thickness | 2500 × 1250 sheet | Per m² |
|---|---|---|
| 0.5 mm | 13.2 kg | 4.2 kg |
| 0.8 mm | 21.2 kg | 6.8 kg |
| 1 mm | 26.5 kg | 8.5 kg |
| 1.2 mm | 31.8 kg | 10.2 kg |
| 1.5 mm | 39.7 kg | 12.7 kg |
| 2 mm | 52.9 kg | 16.9 kg |
| 3 mm | 79.4 kg | 25.4 kg |
| 4 mm | 105.9 kg | 33.9 kg |
Inconel 600 sheet gauge to mm
Gauge numbers are still common on drawings. Weights below use the density of Inconel 600, 8.47 g/cm³.
Full chart: SWG sheet gauge chart.
| SWG | mm | inch | kg/m² (ρ 8.47) |
|---|---|---|---|
| 10 | 3.251 | 0.1280 | 27.54 |
| 11 | 2.946 | 0.1160 | 24.95 |
| 12 | 2.642 | 0.1040 | 22.38 |
| 14 | 2.032 | 0.0800 | 17.21 |
| 16 | 1.626 | 0.0640 | 13.77 |
| 18 | 1.219 | 0.0480 | 10.32 |
| 20 | 0.914 | 0.0360 | 7.74 |
| 22 | 0.711 | 0.0280 | 6.02 |
| 24 | 0.559 | 0.0220 | 4.73 |
Six-digit Harmonized System heading (nickel alloy, chapter 75). Your country adds its own digits — confirm with your customs broker. All HS codes.
How to Verify Inconel 600 Sheet with PMI
Positive material identification with a handheld XRF gun confirms the alloy on the piece itself, in seconds, before it is cut or welded. Inconel 600 is most often mixed up with Incoloy 800 / 800H / 800HT — the table shows which elements tell them apart.
Handheld XRF does not measure carbon or nitrogen; those come from the mill certificate or optical emission (OES) testing. We PMI-test nickel alloys as standard and any grade on request.
| Element | Inconel 600 | Incoloy 800 / 800H / 800HT |
|---|---|---|
| Nickel | 72.0 min | 30.0 – 35.0 |
| Chromium | 14.0 – 17.0 | 19.0 – 23.0 |
| Copper | 0.5 max | 0.75 max |
| Titanium | residual | 0.15 – 0.60 |
| Iron | 6.0 – 10.0 | 39.5 min |
| Manganese | 1.0 max | 1.5 max |
Inconel 600 Sheet Price — What Decides It
Two quotes for "600 sheet" can differ by 20% and both be fair. We quote 600 sheet per kg for full sizes and per piece for cut sizes. These six things move the price per kg, so you can compare offers like for like.
Inconel 600 Sheet Tolerances, Edge & Flatness
Thickness, width, length and flatness tolerances for 600 sheet come from ASTM B906, the general-requirements standard called up by the product specification. Most quality problems with sheet are about these four, not the chemistry.
| Thickness tolerance | Per ASTM B906 tables, by thickness and width; ask for a tighter range on the PO if your press tooling needs it |
|---|---|
| Edge | Mill edge, or slit / cut edge for an exact width |
| Flatness | Standard flatness per ASTM B906; specify levelled or tension-levelled sheet where flatness is critical |
| Surface protection | PVC / PE film on bright and polished finishes; use laser-grade film if the sheet will be laser cut |
| Marking | Grade, heat number and standard on each sheet, or on each bundle for small pieces |
Sheet, Strip, Plate or Coil?
Under ASTM B906, flat material below 3/16" (4.76 mm) and 24" or wider is sheet; cold-rolled material narrower than 24" is strip; 3/16" (4.76 mm) and over it is plate (the metric edition, B906M, rounds these to 5 mm and 600 mm). Coil is the same product wound up for continuous processing — order coil if you will slit, blank or roll-form it yourself.
Inconel 600 Sheet Applications
Sheet goes where 600 has to be formed, pressed or used as a thin lining. For heavy shells, tube sheets and machined parts, see Inconel 600 plate.
How your 600 sheet order runs
- 01Enquiry review — we confirm size, standard edition and documents against your MR or drawing.
- 02Heat selection & PMI — the mill certificate is checked and material is PMI-tested before processing.
- 03Processing — cutting to your sizes, with heat numbers transferred to every piece.
- 04Inspection — your third-party inspector witnesses, or we share photos and test reports.
- 05Packing & dispatch — seaworthy packing from Nhava Sheva (JNPT), Mumbai, FOB or CIF, documents sent before the vessel sails.
Standards on this page
Forming & Welding Inconel 600 Sheet
Thin sheet is formed, folded and welded with little margin for heat. These are the points fabricators ask us about — matching filler for 600 is ERNiCr-3 (AWS A5.14).
General guidance only; follow your approved WPS and forming procedure.
| Bending | Annealed nickel-alloy sheet forms well but work-hardens fast; use generous radii and anneal between severe operations if needed. |
|---|---|
| Cleanliness first | Remove oil, marking ink, sulphur and lead before welding or heat treatment; they embrittle nickel alloys. |
| Thin-gauge welding | TIG (GTAW) with low heat input and argon back-purge; nickel weld pools are sluggish, so do not over-heat to make them flow. |
| Distortion | Copper backing bars and close tacking keep thin sheet flat. |
How to Order Inconel 600 Sheet: RFQ Checklist
Get an accurate quote the first time. Copy this list into your enquiry:
- Standard and edition — e.g. ASTM B168-latest
- Thickness × width × length, and number of pieces
- Finish (2B, BA, No.4…) and protective film if needed
- Certificate type — 3.1 or 3.2, and the inspection agency
- Extra tests — UT, intergranular corrosion
- Delivery port, Incoterm and required date
Inconel 600 sheet for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiInconel 600 sheet — questions buyers ask
Is Inconel 600 the same as Alloy 600?
Yes. Alloy 600, UNS N06600, W.Nr 2.4816 all refer to the same material, and sheet is ordered to ASTM B168 whichever name is on the enquiry.
What is the price of Inconel 600 sheet per kg?
It moves with nickel on the LME, so a fixed list price is out of date within days. Thickness, cut size, quantity and documents also change it. Send your size and quantity and we quote the same working day.
What documents come with an export shipment?
An EN 10204 3.1 mill certificate (or 3.2 with a third-party inspector), commercial invoice, packing list with heat numbers, and certificate of origin. Test reports are added for any extra tests ordered.
Which finish should I order for Inconel 600 sheet?
The standard is cold rolled, annealed and descaled, which most buyers call "2B equivalent". Ask for bright annealed only if you need a brighter surface and the mill can supply it in your thickness.
Is Inconel 600 sheet ordered by gauge or by millimetre?
ASTM B168 uses millimetres or inches. Gauge numbers still appear on older drawings; the gauge-to-mm table on this page converts them, with 8.47 g/cm³ weights for 600.
Can I order Inconel 600 sheet cut to size?
Yes. Send finished sizes and quantities, or a drawing; we quote cut pieces as well as full sheets. Tell us if edges must be deburred or protected.
Sheet, strip or coil — which should I order?
Sheet if you need flat pieces below 3/16" (4.76 mm) and at least 24" wide; strip if narrower; coil if you will slit, blank or roll-form the material on your own line.
What is the minimum order for sheet?
There is no fixed minimum for stock sizes — single sheets and cut pieces are quoted. Mill orders for a non-stock thickness or finish carry the mill minimum.
Inconel 600 or Inconel 625 — which should I choose?
Inconel 600 is chosen for high-temperature oxidation, caustic and nuclear service. Inconel 625 is the step up when you need more pitting resistance or strength. See the comparison table on this page, or ask us with your process conditions.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026