Inconel 600 Anchor BoltUNS N06600 · Project drawing / purchase specification · Manufacturer, trader & exporter, India
Alloy 600 · UNS N06600
An Inconel 600 anchor bolt is a bolt that fixes structures or equipment to concrete. Finished fastener specification not asserted; material/feedstock may be supplied to ASTM B166 (UNS N06600), where applicable; manufacturing route and finished fastener requirements are to the purchase specification or project drawing. Anchor bolts are cast into or drilled into concrete foundations for columns and equipment.
- UNS N06600
- Project drawing / purchase specification
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Inconel 600 Anchor Bolt?
- What it is
- A bolt that fixes structures or equipment to concrete
- Finished spec
- Not asserted
- Material / feedstock
- ASTM B166 (UNS N06600), where applicable
- Dimensions
- Project drawing / purchase specification
- Grade
- Inconel 600 · UNS N06600
- Best at
- High-temperature oxidation, caustic and nuclear service
Inconel 600 Anchor Bolt Specification
| Product | Inconel 600 Anchor Bolt |
|---|---|
| Finished fastener specification | Not asserted |
| Material / feedstock specification | ASTM B166 (UNS N06600), where applicable |
| Dimensional standard | Project drawing / purchase specification |
| Manufacturing route | Route dependent on product design and purchase specification |
| Project / purchase specification | Yes — finished fastener requirements are to the purchase specification or project drawing |
| Sizes | M10 – M64 · ½" – 4" (others on request) |
| Threads | UNC · UN-8 · metric coarse |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose an Anchor Bolt
Anchor bolts are cast into or drilled into concrete foundations for columns and equipment.
- Cast-in or post-installed
- L, J and headed styles
- Made to drawing
More on choosing: Anchor bolt guide.
Inconel 600 Anchor Bolt: Why 600 for anchor bolts
Anchor bolts are cast into or drilled into concrete foundations for columns and equipment. In Inconel 600, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy fasteners match nickel-alloy flanges in corrosive or hot service. Inconel 600 is picked for high-temperature oxidation, caustic and nuclear service. |
|---|---|
| Typical service | Furnaces & heat treating — Muffles, retorts and radiant tubes. |
| Bolting | B7 (coated), B8M or nickel-alloy studs in Inconel 600 (bar to ASTM B166, where applicable), as the project specifies |
Inconel 600 Anchor Bolt Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel (+Co) | As specified |
| Chromium | As specified |
| Iron | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Copper | As specified |
| Sulphur | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM B168 for UNS N06600.
Inconel 600 Anchor Bolt Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM B168 for UNS N06600 — Annealed plate.
Full chemistry, properties and equivalents are on the Inconel 600 grade page.
Standards on this page
Other Inconel 600 fasteners
Inconel 600 Anchor Bolt — questions buyers ask
What do I need to quote anchor bolts?
Diameter, length, bend or head style, thread length and quantity, plus the drawing.
What nut is used with Inconel 600 anchor bolts?
Usually a nut in the same alloy — it may be machined from ASTM B166 bar, where applicable; finished requirements are to the purchase specification or project drawing.
Which standard covers Inconel 600 anchor bolts?
Finished fastener specification: Not asserted. Material / feedstock: ASTM B166 (UNS N06600), where applicable. Dimensions: Project drawing / purchase specification. State the finished specification, material and dimensions on your purchase order or project drawing.
What decides the price of a Inconel 600 anchor bolt?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026