Incoloy 800 / 800H / 800HT Stub EndASTM B366 · ASME B16.9 · Manufacturer, stockist & exporter, India
Alloy 800 · UNS N08800 / N08810 / N08811
An Incoloy 800 / 800H / 800HT stub end is a short pipe length with a flared lap that works with a lap joint flange, made from Incoloy 800 / 800H / 800HT to ASTM B366 WPNIC. Stub ends are welded to the pipe and backed by a loose lap joint flange. Type A (long pattern, ASME B16.9) and short-pattern MSS SP-43 stub ends are the common choices.
- ASTM B366
- ASME B16.9
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Incoloy 800 / 800H / 800HT Stub End?
- What it is
- A short pipe length with a flared lap that works with a lap joint flange
- Material
- ASTM B366 WPNIC
- Dimensions
- ASME B16.9 · MSS SP-43
- Grade
- Incoloy 800 / 800H / 800HT · UNS N08800
- Best at
- Furnaces, petrochemical heaters and high-temperature piping
Incoloy 800 / 800H / 800HT Stub End Specification
| Product | Incoloy 800 / 800H / 800HT Stub End |
|---|---|
| Material standard | ASTM B366 WPNIC |
| Dimensional standard | ASME B16.9 · MSS SP-43 |
| Sizes | ½" – 48" |
| Wall / class | Sch 5S – XXS, to match pipe |
| Ends | Bevelled to ASME B16.25 |
| Testing | PMI · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 · 3.2 with third-party inspection |
When to Choose a Stub End
Stub ends are welded to the pipe and backed by a loose lap joint flange. Type A (long pattern, ASME B16.9) and short-pattern MSS SP-43 stub ends are the common choices.
- Long pattern (ASME B16.9) and short pattern (MSS SP-43)
- Type A, B and C lap designs
- Used with a carbon-steel backing flange to save alloy
More on choosing: Stub end guide.
Incoloy 800 / 800H / 800HT Stub End: Why 800 for stub ends
Stub ends are welded to the pipe and backed by a loose lap joint flange. Type A (long pattern, ASME B16.9) and short-pattern MSS SP-43 stub ends are the common choices. In Incoloy 800 / 800H / 800HT, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy fittings match nickel-alloy pipe in aggressive media. Incoloy 800 / 800H / 800HT is picked for furnaces, petrochemical heaters and high-temperature piping. |
|---|---|
| Typical service | Petrochemical — Steam-methane reformer and ethylene furnace piping. |
| Welding to carbon steel | A nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel |
| Matching filler | ERNiCr-3 (AWS A5.14) |
Incoloy 800 / 800H / 800HT Stub End Chemical Composition
| Element | Weight % |
|---|---|
| Nickel | 30.0 – 35.0 |
| Chromium | 19.0 – 23.0 |
| Iron | 39.5 min |
| Carbon | 0.10 max (800) · 0.05 – 0.10 (800H) |
| Aluminium | 0.15 – 0.60 |
| Titanium | 0.15 – 0.60 |
| Copper | 0.75 max |
| Manganese | 1.5 max |
Incoloy 800 / 800H / 800HT Stub End Mechanical Properties
| Annealed plate | Value |
|---|---|
| Tensile strength | 520 MPa · 75 ksi (800) · 450 MPa · 65 ksi (800H) |
| Yield strength 0.2% | 205 MPa · 30 ksi (800) · 170 MPa · 25 ksi (800H) |
| Elongation | 30% |
Full chemistry, properties and equivalents are on the Incoloy 800 / 800H / 800HT grade page.
Other Incoloy 800 / 800H / 800HT pipe fittings
Incoloy 800 / 800H / 800HT Stub Ends for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiIncoloy 800 / 800H / 800HT Stub End — questions buyers ask
Long or short stub end?
Long-pattern stub ends to ASME B16.9 suit most piping; short-pattern MSS SP-43 stub ends save alloy and space in low-pressure lines.
Can Incoloy 800 / 800H / 800HT stub ends be welded to carbon steel?
Yes — a nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel.
Which standard covers Incoloy 800 / 800H / 800HT stub ends?
The material is ASTM B366 WPNIC; dimensions follow ASME B16.9 · MSS SP-43. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Incoloy 800 / 800H / 800HT stub end?
The alloy price, the size and schedule or class, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 mill certificates as standard, 3.2 with third-party inspection on request, plus dimensional and PMI reports.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026