Inconel 825 Stub EndASTM B366 · ASME B16.9 · Manufacturer, stockist & exporter, India
Incoloy 825 · Alloy 825
An Inconel 825 stub end is a short pipe length with a flared lap that works with a lap joint flange, made from Inconel 825 to ASTM B366 WPNICMC. Stub ends are welded to the pipe and backed by a loose lap joint flange. Type A (long pattern, ASME B16.9) and short-pattern MSS SP-43 stub ends are the common choices.
- ASTM B366
- ASME B16.9
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Inconel 825 Stub End?
- What it is
- A short pipe length with a flared lap that works with a lap joint flange
- Material
- ASTM B366 WPNICMC
- Dimensions
- ASME B16.9 · MSS SP-43
- Grade
- Inconel 825 · UNS N08825
- Best at
- Sulphuric and phosphoric acid service, chloride stress-corrosion cracking and sour gas
Inconel 825 Stub End Specification
| Product | Inconel 825 Stub End |
|---|---|
| Material standard | ASTM B366 WPNICMC |
| Dimensional standard | ASME B16.9 · MSS SP-43 |
| Sizes | ½" – 48" |
| Wall / class | Sch 5S – XXS, to match pipe |
| Ends | Bevelled to ASME B16.25 |
| Testing | PMI · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 · 3.2 with third-party inspection |
When to Choose a Stub End
Stub ends are welded to the pipe and backed by a loose lap joint flange. Type A (long pattern, ASME B16.9) and short-pattern MSS SP-43 stub ends are the common choices.
- Long pattern (ASME B16.9) and short pattern (MSS SP-43)
- Type A, B and C lap designs
- Used with a carbon-steel backing flange to save alloy
More on choosing: Stub end guide.
Inconel 825 Stub End: Why 825 for stub ends
Stub ends are welded to the pipe and backed by a loose lap joint flange. Type A (long pattern, ASME B16.9) and short-pattern MSS SP-43 stub ends are the common choices. In Inconel 825, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy fittings match nickel-alloy pipe in aggressive media. Inconel 825 is picked for sulphuric and phosphoric acid service, chloride stress-corrosion cracking and sour gas. |
|---|---|
| Typical service | Sulphuric & phosphoric acid plants — Tank linings, agitators, heat-exchanger baffles in fertiliser and acid production. |
| Welding to carbon steel | A nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel |
| Matching filler | ERNiFeCr-1 (AWS A5.14) |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Inconel 825 Stub End Chemical Composition
| Element | Weight % |
|---|---|
| Nickel | 38.0 – 46.0 |
| Iron | 22.0 min |
| Chromium | 19.5 – 23.5 |
| Molybdenum | 2.5 – 3.5 |
| Copper | 1.5 – 3.0 |
| Titanium | 0.6 – 1.2 |
| Carbon | 0.05 max |
| Manganese | 1.0 max |
Inconel 825 Stub End Mechanical Properties
| Annealed | Value |
|---|---|
| Tensile strength | 586 MPa · 85 ksi |
| Yield strength 0.2% | 241 MPa · 35 ksi |
| Elongation | 30% |
Full chemistry, properties and equivalents are on the Inconel 825 grade page.
Other Inconel 825 pipe fittings
Inconel 825 Stub Ends for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiInconel 825 Stub End — questions buyers ask
Long or short stub end?
Long-pattern stub ends to ASME B16.9 suit most piping; short-pattern MSS SP-43 stub ends save alloy and space in low-pressure lines.
Can Inconel 825 stub ends be welded to carbon steel?
Yes — a nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel.
Which standard covers Inconel 825 stub ends?
The material is ASTM B366 WPNICMC; dimensions follow ASME B16.9 · MSS SP-43. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Inconel 825 stub end?
The alloy price, the size and schedule or class, quantity, and the testing and documents required. Send your list and we quote the same working day.
Can you supply Inconel 825 stub ends to NACE MR0175?
Yes. Inconel 825 is listed in NACE MR0175 / ISO 15156-3 within its limits; state NACE compliance on the order and it is confirmed on the certificate.
What documents do you supply?
EN 10204 3.1 mill certificates as standard, 3.2 with third-party inspection on request, plus dimensional and PMI reports.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026