SS 310 / 310S Stub EndASTM A403 · ASME B16.9 · Manufacturer, trader & exporter, India
AISI 310S · UNS S31008
An SS 310 / 310S stub end is a short pipe length with a flared lap that works with a lap joint flange, made from SS 310 / 310S to ASTM A403 WP310S. Stub ends are welded to the pipe and backed by a loose lap joint flange. Type A (long pattern, ASME B16.9) and short-pattern MSS SP-43 stub ends are the common choices.
- ASTM A403
- ASME B16.9
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an SS 310 / 310S Stub End?
- What it is
- A short pipe length with a flared lap that works with a lap joint flange
- Material
- ASTM A403 WP310S
- Dimensions
- ASME B16.9 · MSS SP-43
- Grade
- SS 310 / 310S · UNS S31008
- Best at
- Furnaces, burners and heat treatment at high temperature
SS 310 / 310S Stub End Specification
| Product | SS 310 / 310S Stub End |
|---|---|
| Material standard | ASTM A403 WP310S |
| Dimensional standard | ASME B16.9 · MSS SP-43 |
| Sizes | ½" – 48" |
| Wall / class | Sch 5S – XXS, to match pipe |
| Ends | Bevelled to ASME B16.25 |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Stub End
Stub ends are welded to the pipe and backed by a loose lap joint flange. Type A (long pattern, ASME B16.9) and short-pattern MSS SP-43 stub ends are the common choices.
- Long pattern (ASME B16.9) and short pattern (MSS SP-43)
- Type A, B and C lap designs
- Used with a carbon-steel backing flange to save alloy
More on choosing: Stub end guide.
SS 310 / 310S Stub End: Why 310S for stub ends
Stub ends are welded to the pipe and backed by a loose lap joint flange. Type A (long pattern, ASME B16.9) and short-pattern MSS SP-43 stub ends are the common choices. In SS 310 / 310S, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Stainless fittings keep the line clean and corrosion-free. SS 310 / 310S is picked for furnaces, burners and heat treatment at high temperature. |
|---|---|
| Typical service | Furnace parts — Muffles, retorts, radiant tubes and conveyor belts. |
| Welding to carbon steel | ER309L (or E309L electrode) is the usual filler when joining it to carbon steel |
| Matching filler | ER310 (AWS A5.9) |
SS 310 / 310S Stub End Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Nickel | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Phosphorus | As specified |
| Sulphur | As specified |
| Iron | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS S31008.
SS 310 / 310S Stub End Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS S31008 — Annealed plate & sheet.
Full chemistry, properties and equivalents are on the SS 310 / 310S grade page.
Other SS 310 / 310S pipe fittings
SS 310 / 310S Stub End — questions buyers ask
Long or short stub end?
Long-pattern stub ends to ASME B16.9 suit most piping; short-pattern MSS SP-43 stub ends save alloy and space in low-pressure lines.
Can SS 310 / 310S stub ends be welded to carbon steel?
Yes — ER309L (or E309L electrode) is the usual filler when joining it to carbon steel.
Which standard covers SS 310 / 310S stub ends?
The material is ASTM A403 WP310S; dimensions follow ASME B16.9 · MSS SP-43. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a SS 310 / 310S stub end?
The alloy price, the size and schedule or class, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026