SS 310 / 310S BendASTM A403 · ASME B16.49 · Manufacturer, trader & exporter, India
AISI 310S · UNS S31008
An SS 310 / 310S bend is a pipe bend with a larger radius than a standard elbow, made from SS 310 / 310S to ASTM A403 WP310S. Bends of 3D, 5D and larger radius give smoother flow than elbows and suit slurry, pigging and pipeline service. They are induction- or cold-bent from pipe.
- ASTM A403
- ASME B16.49
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an SS 310 / 310S Bend?
- What it is
- A pipe bend with a larger radius than a standard elbow
- Material
- ASTM A403 WP310S
- Dimensions
- ASME B16.49 · project specs
- Grade
- SS 310 / 310S · UNS S31008
- Best at
- Furnaces, burners and heat treatment at high temperature
SS 310 / 310S Bend Specification
| Product | SS 310 / 310S Bend |
|---|---|
| Material standard | ASTM A403 WP310S |
| Dimensional standard | ASME B16.49 · project specs |
| Sizes | ½" – 48" |
| Wall / class | Sch 5S – XXS, to match pipe |
| Ends | Bevelled to ASME B16.25 |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Bend
Bends of 3D, 5D and larger radius give smoother flow than elbows and suit slurry, pigging and pipeline service. They are induction- or cold-bent from pipe.
- 3D, 5D and custom radius
- Induction or cold bending
- Tangent lengths to order
More on choosing: Bend guide.
SS 310 / 310S Bend: Why 310S for bends
Bends of 3D, 5D and larger radius give smoother flow than elbows and suit slurry, pigging and pipeline service. They are induction- or cold-bent from pipe. In SS 310 / 310S, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Stainless fittings keep the line clean and corrosion-free. SS 310 / 310S is picked for furnaces, burners and heat treatment at high temperature. |
|---|---|
| Typical service | Furnace parts — Muffles, retorts, radiant tubes and conveyor belts. |
| Welding to carbon steel | ER309L (or E309L electrode) is the usual filler when joining it to carbon steel |
| Matching filler | ER310 (AWS A5.9) |
SS 310 / 310S Bend Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Nickel | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Phosphorus | As specified |
| Sulphur | As specified |
| Iron | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS S31008.
SS 310 / 310S Bend Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS S31008 — Annealed plate & sheet.
Full chemistry, properties and equivalents are on the SS 310 / 310S grade page.
Other SS 310 / 310S pipe fittings
SS 310 / 310S Bend — questions buyers ask
Bend or elbow — what is the difference?
An elbow has a fixed 1D or 1.5D radius to ASME B16.9; a bend is bent from pipe to a larger radius, typically 3D or 5D.
Can SS 310 / 310S bends be welded to carbon steel?
Yes — ER309L (or E309L electrode) is the usual filler when joining it to carbon steel.
Which standard covers SS 310 / 310S bends?
The material is ASTM A403 WP310S; dimensions follow ASME B16.49 · project specs. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a SS 310 / 310S bend?
The alloy price, the size and schedule or class, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026