Inconel 825 LateralASTM B366 · MSS SP-43 / manufacturer standard · Manufacturer, trader & exporter, India
Incoloy 825 · Alloy 825
An Inconel 825 lateral is a fitting with a 45° branch, made from Inconel 825 to ASTM B366 WPNICMC. Laterals bring in a branch at 45°, reducing turbulence and pressure drop compared to a tee. Common in drainage, slurry and process lines.
For the full 825 fittings range, see Inconel 825 pipe fittings.
- ASTM B366
- MSS SP-43 / manufacturer standard
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Inconel 825 Lateral?
- What it is
- A fitting with a 45° branch
- Material
- ASTM B366 WPNICMC
- Dimensions
- MSS SP-43 / manufacturer standard
- Grade
- Inconel 825 · UNS N08825
- Best at
- Sulphuric and phosphoric acid service, chloride stress-corrosion cracking and sour gas
Inconel 825 Lateral Specification
| Product | Inconel 825 Lateral |
|---|---|
| Material standard | ASTM B366 WPNICMC |
| Dimensional standard | MSS SP-43 / manufacturer standard |
| Sizes | ½" – 48" |
| Wall / class | Sch 5S – XXS, to match pipe |
| Ends | Bevelled to ASME B16.25 |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Lateral
Laterals bring in a branch at 45°, reducing turbulence and pressure drop compared to a tee. Common in drainage, slurry and process lines.
- 45° branch
- Equal and reducing
- Often fabricated
More on choosing: Lateral guide.
Inconel 825 Lateral: Why 825 for laterals
Laterals bring in a branch at 45°, reducing turbulence and pressure drop compared to a tee. Common in drainage, slurry and process lines. In Inconel 825, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy fittings match nickel-alloy pipe in aggressive media. Inconel 825 is picked for sulphuric and phosphoric acid service, chloride stress-corrosion cracking and sour gas. |
|---|---|
| Typical service | Sulphuric & phosphoric acid plants — Tank linings, agitators, heat-exchanger baffles in fertiliser and acid production. |
| Welding to carbon steel | A nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel |
| Matching filler | ERNiFeCr-1 (AWS A5.14) |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Inconel 825 Lateral Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel | As specified |
| Iron | As specified |
| Chromium | As specified |
| Molybdenum | As specified |
| Copper | As specified |
| Titanium | As specified |
| Carbon | As specified |
| Manganese | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM B424 / B423 / B564 for UNS N08825.
Inconel 825 Lateral Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM B424 / B423 / B564 for UNS N08825 — Annealed.
Full chemistry, properties and equivalents are on the Inconel 825 grade page.
Other Inconel 825 pipe fittings
Inconel 825 Lateral — questions buyers ask
When is a lateral better than a tee?
Where lower turbulence matters — slurries, solids and gravity drainage.
Can Inconel 825 laterals be welded to carbon steel?
Yes — a nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel.
Which standard covers Inconel 825 laterals?
The material is ASTM B366 WPNICMC; dimensions follow MSS SP-43 / manufacturer standard. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Inconel 825 lateral?
The alloy price, the size and schedule or class, quantity, and the testing and documents required. Send your list and we quote the same working day.
Can Inconel 825 laterals be supplied to NACE MR0175?
Inconel 825 (UNS N08825) can be supplied for sour service when the PO specifies NACE MR0175 / ISO 15156; acceptability depends on the material condition, hardness and the environmental limits in that standard, which the purchaser must confirm for the application.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026