Incoloy 800 / 800H / 800HT LateralASTM B366 · MSS SP-43 / manufacturer standard · Manufacturer, trader & exporter, India
Alloy 800 · UNS N08800 / N08810 / N08811
An Incoloy 800 / 800H / 800HT lateral is a fitting with a 45° branch, made from Incoloy 800 / 800H / 800HT to ASTM B366 WPNIC. Laterals bring in a branch at 45°, reducing turbulence and pressure drop compared to a tee. Common in drainage, slurry and process lines.
- ASTM B366
- MSS SP-43 / manufacturer standard
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Incoloy 800 / 800H / 800HT Lateral?
- What it is
- A fitting with a 45° branch
- Material
- ASTM B366 WPNIC
- Dimensions
- MSS SP-43 / manufacturer standard
- Grade
- Incoloy 800 / 800H / 800HT · UNS N08800
- Best at
- Furnaces, petrochemical heaters and high-temperature piping
Incoloy 800 / 800H / 800HT Lateral Specification
| Product | Incoloy 800 / 800H / 800HT Lateral |
|---|---|
| Material standard | ASTM B366 WPNIC |
| Dimensional standard | MSS SP-43 / manufacturer standard |
| Sizes | ½" – 48" |
| Wall / class | Sch 5S – XXS, to match pipe |
| Ends | Bevelled to ASME B16.25 |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Lateral
Laterals bring in a branch at 45°, reducing turbulence and pressure drop compared to a tee. Common in drainage, slurry and process lines.
- 45° branch
- Equal and reducing
- Often fabricated
More on choosing: Lateral guide.
Incoloy 800 / 800H / 800HT Lateral: Why 800 for laterals
Laterals bring in a branch at 45°, reducing turbulence and pressure drop compared to a tee. Common in drainage, slurry and process lines. In Incoloy 800 / 800H / 800HT, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy fittings match nickel-alloy pipe in aggressive media. Incoloy 800 / 800H / 800HT is picked for furnaces, petrochemical heaters and high-temperature piping. |
|---|---|
| Typical service | Petrochemical — Steam-methane reformer and ethylene furnace piping. |
| Welding to carbon steel | A nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel |
| Matching filler | ERNiCr-3 (AWS A5.14) |
Incoloy 800 / 800H / 800HT Lateral Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel | As specified |
| Chromium | As specified |
| Iron | As specified |
| Carbon | As specified |
| Aluminium | As specified |
| Titanium | As specified |
| Copper | As specified |
| Manganese | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM B409 for UNS N08800 / N08810.
Incoloy 800 / 800H / 800HT Lateral Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM B409 for UNS N08800 / N08810 — Annealed plate.
Full chemistry, properties and equivalents are on the Incoloy 800 / 800H / 800HT grade page.
Other Incoloy 800 / 800H / 800HT pipe fittings
Incoloy 800 / 800H / 800HT Lateral — questions buyers ask
When is a lateral better than a tee?
Where lower turbulence matters — slurries, solids and gravity drainage.
Can Incoloy 800 / 800H / 800HT laterals be welded to carbon steel?
Yes — a nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel.
Which standard covers Incoloy 800 / 800H / 800HT laterals?
The material is ASTM B366 WPNIC; dimensions follow MSS SP-43 / manufacturer standard. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Incoloy 800 / 800H / 800HT lateral?
The alloy price, the size and schedule or class, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026