Incoloy 800 / 800H / 800HT TeeASTM B366 · ASME B16.9 · Manufacturer, trader & exporter, India
Alloy 800 · UNS N08800 / N08810 / N08811
An Incoloy 800 / 800H / 800HT tee is a fitting with a 90° branch that splits or combines flow, made from Incoloy 800 / 800H / 800HT to ASTM B366 WPNIC (buttweld) · ASTM B564 (forged). Equal tees have the same size branch as the run; reducing tees have a smaller branch. Barred tees add internal bars so pipeline pigs pass the branch.
- ASTM B366
- ASME B16.9
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Incoloy 800 / 800H / 800HT Tee?
- What it is
- A fitting with a 90° branch that splits or combines flow
- Material
- ASTM B366 WPNIC (buttweld) · ASTM B564 (forged)
- Dimensions
- ASME B16.9 · B16.11
- Grade
- Incoloy 800 / 800H / 800HT · UNS N08800
- Best at
- Furnaces, petrochemical heaters and high-temperature piping
Incoloy 800 / 800H / 800HT Tee Specification
| Product | Incoloy 800 / 800H / 800HT Tee |
|---|---|
| Material standard | ASTM B366 WPNIC (buttweld) · ASTM B564 (forged) |
| Dimensional standard | ASME B16.9 · B16.11 |
| Sizes | Buttweld ½" – 48" · forged ⅛" – 4" |
| Wall / class | Schedule to match pipe · Class 3000 / 6000 (forged) |
| Ends | Bevelled to ASME B16.25 |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Tee
Equal tees have the same size branch as the run; reducing tees have a smaller branch. Barred tees add internal bars so pipeline pigs pass the branch.
- Equal and reducing
- Barred tees for piggable lines
- Buttweld, socket weld or threaded
More on choosing: Tee guide.
Incoloy 800 / 800H / 800HT Tee: Why 800 for tees
Equal tees have the same size branch as the run; reducing tees have a smaller branch. Barred tees add internal bars so pipeline pigs pass the branch. In Incoloy 800 / 800H / 800HT, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy fittings match nickel-alloy pipe in aggressive media. Incoloy 800 / 800H / 800HT is picked for furnaces, petrochemical heaters and high-temperature piping. |
|---|---|
| Typical service | Petrochemical — Steam-methane reformer and ethylene furnace piping. |
| Welding to carbon steel | A nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel |
| Matching filler | ERNiCr-3 (AWS A5.14) |
Incoloy 800 / 800H / 800HT Tee Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel | As specified |
| Chromium | As specified |
| Iron | As specified |
| Carbon | As specified |
| Aluminium | As specified |
| Titanium | As specified |
| Copper | As specified |
| Manganese | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM B409 for UNS N08800 / N08810.
Incoloy 800 / 800H / 800HT Tee Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM B409 for UNS N08800 / N08810 — Annealed plate.
Full chemistry, properties and equivalents are on the Incoloy 800 / 800H / 800HT grade page.
Other Incoloy 800 / 800H / 800HT pipe fittings
Incoloy 800 / 800H / 800HT Tee dimensions — ASME B16.9
Values in mm, the same for every material; the wall thickness matches the pipe schedule.
| NPS | OD | Tee centre-to-end C |
|---|---|---|
| ½" | 21.3 | 25 |
| ¾" | 26.7 | 29 |
| 1" | 33.4 | 38 |
| 1½" | 48.3 | 57 |
| 2" | 60.3 | 64 |
| 3" | 88.9 | 86 |
| 4" | 114.3 | 105 |
| 6" | 168.3 | 143 |
| 8" | 219.1 | 178 |
| 10" | 273.1 | 216 |
| 12" | 323.9 | 254 |
| 16" | 406.4 | 305 |
| 20" | 508.0 | 381 |
| 24" | 610.0 | 432 |
Full chart: ASME B16.9 fitting dimensions.
Incoloy 800 / 800H / 800HT Tee — questions buyers ask
What is a barred tee?
A tee with bars welded across the branch opening so a pipeline pig cannot enter the branch.
Can Incoloy 800 / 800H / 800HT tees be welded to carbon steel?
Yes — a nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel.
Which standard covers Incoloy 800 / 800H / 800HT tees?
The material is ASTM B366 WPNIC (buttweld) · ASTM B564 (forged); dimensions follow ASME B16.9 · B16.11. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Incoloy 800 / 800H / 800HT tee?
The alloy price, the size and schedule or class, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026