IS 2062 E250 / E350 Chequered SheetIS 2062 · Mill standard · Manufacturer, trader & exporter, India
IS 2062 E250BR · MS plate
An IS 2062 E250 / E350 chequered sheet is sheet with a raised anti-slip pattern, made from IS 2062 E250 / E350 to IS 2062. Chequered sheet is used for floors, stair treads and vehicle decks.
- IS 2062
- Mill standard
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an IS 2062 E250 / E350 Chequered Sheet?
- What it is
- Sheet with a raised anti-slip pattern
- Material
- IS 2062
- Dimensions
- Mill standard
- Grade
- IS 2062 E250 / E350
- Best at
- Structures, fabrication and general engineering in India
IS 2062 E250 / E350 Chequered Sheet Specification
| Product | IS 2062 E250 / E350 Chequered Sheet |
|---|---|
| Material standard | IS 2062 |
| Dimensional standard | Mill standard |
| Thickness | Below 4.76 mm (3/16") |
| Size | 1000 / 1219 / 1250 / 1500 × 2000 / 2438 / 2500 / 3000 mm or cut |
| Testing | Chemical & mechanical per heat · NDT · impact where specified |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Chequered Sheet
Chequered sheet is used for floors, stair treads and vehicle decks.
- Diamond or lentil pattern
- Anti-slip
- Light gauges
More on choosing: Chequered sheet guide.
IS 2062 E250 / E350 Chequered Sheet: Why IS 2062 for chequered sheets
Chequered sheet is used for floors, stair treads and vehicle decks. In IS 2062 E250 / E350, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Carbon steel sheet suits structural and general fabrication. IS 2062 E250 / E350 is picked for structures, fabrication and general engineering in India. |
|---|---|
| Typical service | Construction — Structural steelwork. |
| Matching filler | E7018 / ER70S-6 |
IS 2062 E250 / E350 Chequered Sheet Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Phosphorus | As specified |
| Sulphur | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: IS 2062.
IS 2062 E250 / E350 Chequered Sheet Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Yield strength | As specified |
| Tensile strength | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: IS 2062 — condition per order.
Full chemistry, properties and equivalents are on the IS 2062 E250 / E350 grade page.
Standards on this page
IS 2062 E250 / E350 Chequered Sheet — questions buyers ask
What pattern options are available?
Diamond and lentil (5-bar) patterns are the most common.
Which standard covers IS 2062 E250 / E350 chequered sheets?
The material is IS 2062; dimensions follow Mill standard. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a IS 2062 E250 / E350 chequered sheet?
The steel price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026