S355J2+N Chequered SheetEN 10025 · Mill standard · Manufacturer, trader & exporter, India
EN 10025-2 S355J2+N · W.Nr 1.0577
An S355J2+N chequered sheet is sheet with a raised anti-slip pattern, made from S355J2+N to EN 10025-2. Chequered sheet is used for floors, stair treads and vehicle decks.
- EN 10025
- Mill standard
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an S355J2+N Chequered Sheet?
- What it is
- Sheet with a raised anti-slip pattern
- Material
- EN 10025-2
- Dimensions
- Mill standard
- Grade
- S355J2+N
- Best at
- Heavy structures, cranes and offshore frames
S355J2+N Chequered Sheet Specification
| Product | S355J2+N Chequered Sheet |
|---|---|
| Material standard | EN 10025-2 |
| Dimensional standard | Mill standard |
| Thickness | Below 4.76 mm (3/16") |
| Size | 1000 / 1219 / 1250 / 1500 × 2000 / 2438 / 2500 / 3000 mm or cut |
| Testing | Chemical & mechanical per heat · NDT · impact where specified |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Chequered Sheet
Chequered sheet is used for floors, stair treads and vehicle decks.
- Diamond or lentil pattern
- Anti-slip
- Light gauges
More on choosing: Chequered sheet guide.
S355J2+N Chequered Sheet: Why S355J2+N for chequered sheets
Chequered sheet is used for floors, stair treads and vehicle decks. In S355J2+N, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Carbon steel sheet suits structural and general fabrication. S355J2+N is picked for heavy structures, cranes and offshore frames. |
|---|---|
| Typical service | Heavy structures — Bridges, cranes and towers. |
| Matching filler | E7018 / ER70S-6 |
S355J2+N Chequered Sheet Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Phosphorus | As specified |
| Sulphur | As specified |
| Copper | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: EN 10025-2 for S355J2.
S355J2+N Chequered Sheet Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Yield strength | As specified |
| Tensile strength | As specified |
| Elongation | As specified |
| Charpy impact | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: EN 10025-2 for S355J2 — Normalised (+N).
Full chemistry, properties and equivalents are on the S355J2+N grade page.
Standards on this page
S355J2+N Chequered Sheet — questions buyers ask
What pattern options are available?
Diamond and lentil (5-bar) patterns are the most common.
Which standard covers S355J2+N chequered sheets?
The material is EN 10025-2; dimensions follow Mill standard. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a S355J2+N chequered sheet?
The steel price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026