Monel K500 Swivel Ring FlangeISO 27509 / project specs · Manufacturer, trader & exporter, India
Alloy K-500 · UNS N05500 · SRF
A Monel K500 swivel ring flange is a flange with a rotating ring that allows bolt holes to be aligned after welding, made from Monel K500 to project / purchase specification dependent. Swivel ring flanges speed up subsea and offshore tie-ins and riser connections, where rotating the whole pipe to line up bolt holes is not possible.
- Monel K500
- ISO 27509 / project specs
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is a Monel K500 Swivel Ring Flange?
- What it is
- A flange with a rotating ring that allows bolt holes to be aligned after welding
- Material
- project / purchase specification dependent
- Dimensions
- ISO 27509 / project specs
- Grade
- Monel K500 · UNS N05500
- Best at
- High-strength pump shafts, bolting and springs in seawater
Monel K500 Swivel Ring Flange Specification
| Product | Monel K500 Swivel Ring Flange |
|---|---|
| Material standard | project / purchase specification dependent |
| Dimensional standard | ISO 27509 / project specs |
| Sizes | ½" – 24" (ASME B16.5) · 26" – 60" (ASME B16.47) |
| Pressure class | Class 150, 300, 400, 600, 900, 1500, 2500 · PN 6 – PN 100 |
| Facing | RF · FF · RTJ · tongue & groove |
| Bore | To match pipe schedule (state on order) |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Swivel Ring Flange
Swivel ring flanges speed up subsea and offshore tie-ins and riser connections, where rotating the whole pipe to line up bolt holes is not possible.
- Hub welded to pipe; ring rotates
- Common on subsea and offshore lines
- Made to ISO 27509 / DNV or project specs
More on choosing: Swivel ring flange guide.
Monel K500 Swivel Ring Flange: Why K500 for swivel ring flanges
Swivel ring flanges speed up subsea and offshore tie-ins and riser connections, where rotating the whole pipe to line up bolt holes is not possible. In Monel K500, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy flanges are used where acids, chlorides or heat defeat stainless. Monel K500 is picked for high-strength pump shafts, bolting and springs in seawater. |
|---|---|
| Typical service | Marine — Propeller and pump shafts. |
| Bolting | B7 (coated), B8M or nickel-alloy studs in Monel K500 (bar to ASTM B865, where applicable), as the project specifies |
| Welding to carbon steel | A nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel |
| Matching filler | ERNiCu-7 (non-ageing) |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Monel K500 Swivel Ring Flange Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel (+Co) | As specified |
| Copper | As specified |
| Aluminium | As specified |
| Titanium | As specified |
| Iron | As specified |
| Manganese | As specified |
| Carbon | As specified |
| Silicon | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM B865 for UNS N05500.
Monel K500 Swivel Ring Flange Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM B865 for UNS N05500 — Age-hardened bar.
Full chemistry, properties and equivalents are on the Monel K500 grade page.
Standards on this page
Other Monel K500 flanges
Monel K500 Swivel Ring Flange — questions buyers ask
Where are swivel ring flanges used?
Mainly in subsea and offshore pipelines, risers and spools where alignment in place is difficult.
Can Monel K500 swivel ring flanges be welded to carbon steel?
Yes — a nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel.
Which standard covers Monel K500 swivel ring flanges?
The finished flange specification is project / purchase specification dependent, so none is named here; dimensions follow ISO 27509 / project specs. State the flange specification your project requires on the purchase order.
What decides the price of a Monel K500 swivel ring flange?
The alloy price, the size and pressure class, quantity, and the testing and documents required. Send your list and we quote the same working day.
Can you supply Monel K500 swivel ring flanges to NACE MR0175?
Yes. Monel K500 is listed in NACE MR0175 / ISO 15156-3 within its limits; state NACE compliance on the order and it is confirmed on the certificate.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026