SS 310 / 310S Swivel Ring FlangeASTM A182 · ISO 27509 / project specs · Manufacturer, stockist & exporter, India
AISI 310S · UNS S31008 · SRF
An SS 310 / 310S swivel ring flange is a flange with a rotating ring that allows bolt holes to be aligned after welding, made from SS 310 / 310S to ASTM A182 F310. Swivel ring flanges speed up subsea and offshore tie-ins and riser connections, where rotating the whole pipe to line up bolt holes is not possible.
- ASTM A182
- ISO 27509 / project specs
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an SS 310 / 310S Swivel Ring Flange?
- What it is
- A flange with a rotating ring that allows bolt holes to be aligned after welding
- Material
- ASTM A182 F310
- Dimensions
- ISO 27509 / project specs
- Grade
- SS 310 / 310S · UNS S31008
- Best at
- Furnaces, burners and heat treatment at high temperature
SS 310 / 310S Swivel Ring Flange Specification
| Product | SS 310 / 310S Swivel Ring Flange |
|---|---|
| Material standard | ASTM A182 F310 |
| Dimensional standard | ISO 27509 / project specs |
| Sizes | ½" – 24" (ASME B16.5) · 26" – 60" (ASME B16.47) |
| Pressure class | Class 150, 300, 400, 600, 900, 1500, 2500 · PN 6 – PN 100 |
| Facing | RF · FF · RTJ · tongue & groove |
| Bore | To match pipe schedule (state on order) |
| Testing | PMI · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 · 3.2 with third-party inspection |
When to Choose a Swivel Ring Flange
Swivel ring flanges speed up subsea and offshore tie-ins and riser connections, where rotating the whole pipe to line up bolt holes is not possible.
- Hub welded to pipe; ring rotates
- Common on subsea and offshore lines
- Made to ISO 27509 / DNV or project specs
More on choosing: Swivel ring flange guide.
SS 310 / 310S Swivel Ring Flange: Why 310S for swivel ring flanges
Swivel ring flanges speed up subsea and offshore tie-ins and riser connections, where rotating the whole pipe to line up bolt holes is not possible. In SS 310 / 310S, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Stainless flanges are chosen where carbon steel would rust or contaminate the process. SS 310 / 310S is picked for furnaces, burners and heat treatment at high temperature. |
|---|---|
| Typical service | Furnace parts — Muffles, retorts, radiant tubes and conveyor belts. |
| Bolting | A193 B8 or project-specified bolting |
| Welding to carbon steel | ER309L (or E309L electrode) is the usual filler when joining it to carbon steel |
| Matching filler | ER310 (AWS A5.9) |
SS 310 / 310S Swivel Ring Flange Chemical Composition
| Element | Weight % |
|---|---|
| Chromium | 24.0 – 26.0 |
| Nickel | 19.0 – 22.0 |
| Carbon | 0.08 max |
| Manganese | 2.00 max |
| Silicon | 1.50 max |
| Phosphorus | 0.045 max |
| Sulphur | 0.030 max |
| Iron | Balance |
SS 310 / 310S Swivel Ring Flange Mechanical Properties
| Annealed plate & sheet | Value |
|---|---|
| Tensile strength | 515 MPa · 75 ksi |
| Yield strength 0.2% | 205 MPa · 30 ksi |
| Elongation | 40% |
| Hardness | 217 HB max |
Full chemistry, properties and equivalents are on the SS 310 / 310S grade page.
Other SS 310 / 310S flanges
SS 310 / 310S Swivel Ring Flanges for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiSS 310 / 310S Swivel Ring Flange — questions buyers ask
Where are swivel ring flanges used?
Mainly in subsea and offshore pipelines, risers and spools where alignment in place is difficult.
Can SS 310 / 310S swivel ring flanges be welded to carbon steel?
Yes — ER309L (or E309L electrode) is the usual filler when joining it to carbon steel.
Which standard covers SS 310 / 310S swivel ring flanges?
The material is ASTM A182 F310; dimensions follow ISO 27509 / project specs. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a SS 310 / 310S swivel ring flange?
The alloy price, the size and pressure class, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 mill certificates as standard, 3.2 with third-party inspection on request, plus dimensional and PMI reports.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026