Super Duplex S32760 Reducing FlangeASTM A182 · ASME B16.5 · Manufacturer, trader & exporter, India
UNS S32760 · W.Nr 1.4501 · RF
A Super Duplex S32760 reducing flange is a flange with a smaller bore than its outside dimensions, connecting to a smaller pipe, made from Super Duplex S32760 to ASTM A182 F55. A reducing flange changes pipe size at a flanged joint without a separate reducer, saving space and a weld. Use it where the flow disturbance from a sudden change is acceptable.
- ASTM A182
- ASME B16.5
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is a Super Duplex S32760 Reducing Flange?
- What it is
- A flange with a smaller bore than its outside dimensions, connecting to a smaller pipe
- Material
- ASTM A182 F55
- Dimensions
- ASME B16.5
- Grade
- Super Duplex S32760 · UNS S32760
- Best at
- Seawater firewater, injection and offshore piping
Super Duplex S32760 Reducing Flange Specification
| Product | Super Duplex S32760 Reducing Flange |
|---|---|
| Material standard | ASTM A182 F55 |
| Dimensional standard | ASME B16.5 |
| Sizes | ½" – 24" (ASME B16.5) · 26" – 60" (ASME B16.47) |
| Pressure class | Class 150, 300, 400, 600, 900, 1500, 2500 · PN 6 – PN 100 |
| Facing | RF · FF · RTJ · tongue & groove |
| Bore | To match pipe schedule (state on order) |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Reducing Flange
A reducing flange changes pipe size at a flanged joint without a separate reducer, saving space and a weld. Use it where the flow disturbance from a sudden change is acceptable.
- Outside dimensions of the larger size
- Bore / hub for the smaller pipe
- Weld neck, slip-on or threaded styles
More on choosing: Reducing flange guide.
Super Duplex S32760 Reducing Flange: Why S32760 for reducing flanges
A reducing flange changes pipe size at a flanged joint without a separate reducer, saving space and a weld. Use it where the flow disturbance from a sudden change is acceptable. In Super Duplex S32760, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Duplex flanges give stainless corrosion resistance with roughly twice the strength of 316L. Super Duplex S32760 is picked for seawater firewater, injection and offshore piping. |
|---|---|
| Typical service | Offshore — Firewater and seawater piping. |
| B16.5 material group | 2.8 |
| Bolting | B7 (coated), B8M or duplex studs, as the project specifies |
| Welding to carbon steel | ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS |
| Matching filler | ER2594 · Zeron 100X |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Super Duplex S32760 Reducing Flange Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Nickel | As specified |
| Molybdenum | As specified |
| Nitrogen | As specified |
| Copper | As specified |
| Tungsten | As specified |
| Carbon | As specified |
| Manganese | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS S32760.
Super Duplex S32760 Reducing Flange Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS S32760 — Solution-annealed plate.
Full chemistry, properties and equivalents are on the Super Duplex S32760 grade page.
Other Super Duplex S32760 flanges
Super Duplex S32760 Reducing Flange dimensions — ASME B16.5 Class 150 & 300
Outside diameter, thickness and bolting are set by size and class. Values in mm; thickness excludes the 1.6 mm raised face.
| NPS | Cl 150 OD | Cl 150 thickness | Cl 150 bolt circle | Cl 150 bolts | Cl 300 OD | Cl 300 thickness | Cl 300 bolt circle | Cl 300 bolts |
|---|---|---|---|---|---|---|---|---|
| ½" | 90 | 9.6 | 60.3 | 4 × ½" | 95 | 12.7 | 66.7 | 4 × ½" |
| 1" | 110 | 12.7 | 79.4 | 4 × ½" | 125 | 15.9 | 88.9 | 4 × ⅝" |
| 1½" | 125 | 15.9 | 98.4 | 4 × ½" | 155 | 19.1 | 114.3 | 4 × ¾" |
| 2" | 150 | 17.5 | 120.7 | 4 × ⅝" | 165 | 20.7 | 127.0 | 8 × ⅝" |
| 3" | 190 | 22.3 | 152.4 | 4 × ⅝" | 210 | 27.0 | 168.3 | 8 × ¾" |
| 4" | 230 | 22.3 | 190.5 | 8 × ⅝" | 255 | 30.2 | 200.0 | 8 × ¾" |
| 6" | 280 | 23.9 | 241.3 | 8 × ¾" | 320 | 35.0 | 269.9 | 12 × ¾" |
| 8" | 345 | 27.0 | 298.5 | 8 × ¾" | 380 | 39.7 | 330.2 | 12 × ⅞" |
| 10" | 405 | 28.6 | 362.0 | 12 × ⅞" | 445 | 46.1 | 387.4 | 16 × 1" |
| 12" | 485 | 30.2 | 431.8 | 12 × ⅞" | 520 | 49.3 | 450.8 | 16 × 1⅛" |
Full chart: ASME B16.5 flange dimensions.
Super Duplex S32760 Reducing Flange — questions buyers ask
Is a reducing flange better than a reducer plus flange?
It saves length and a weld, but a buttweld reducer gives smoother flow. Choose by space and process needs.
What pressure rating does a Super Duplex S32760 reducing flange have?
It depends on class and temperature. Super Duplex S32760 forgings are in ASME B16.5 material group 2.8; read your class column in that group's table at the design temperature.
Can Super Duplex S32760 reducing flanges be welded to carbon steel?
Yes — ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS.
Which standard covers Super Duplex S32760 reducing flanges?
The material is ASTM A182 F55; dimensions follow ASME B16.5. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Super Duplex S32760 reducing flange?
The alloy price, the size and pressure class, quantity, and the testing and documents required. Send your list and we quote the same working day.
Can you supply Super Duplex S32760 reducing flanges to NACE MR0175?
Yes. Super Duplex S32760 is listed in NACE MR0175 / ISO 15156-3 within its limits; state NACE compliance on the order and it is confirmed on the certificate.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026