Super Duplex S32760 Orifice FlangeASTM A182 · ASME B16.36 · Manufacturer, trader & exporter, India
UNS S32760 · W.Nr 1.4501 · ORF
A Super Duplex S32760 orifice flange is a pair of weld neck or slip-on flanges with pressure taps that hold an orifice plate, made from Super Duplex S32760 to ASTM A182 F55. Orifice flanges are used for flow measurement. Each flange has two ½" NPT pressure-tap holes, and jack screws help separate the pair to change the plate.
- ASTM A182
- ASME B16.36
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is a Super Duplex S32760 Orifice Flange?
- What it is
- A pair of weld neck or slip-on flanges with pressure taps that hold an orifice plate
- Material
- ASTM A182 F55
- Dimensions
- ASME B16.36
- Grade
- Super Duplex S32760 · UNS S32760
- Best at
- Seawater firewater, injection and offshore piping
Super Duplex S32760 Orifice Flange Specification
| Product | Super Duplex S32760 Orifice Flange |
|---|---|
| Material standard | ASTM A182 F55 |
| Dimensional standard | ASME B16.36 |
| Sizes | 1" – 24" (ASME B16.36) |
| Pressure class | Class 300 – 2500 |
| Facing | RF · FF · RTJ · tongue & groove |
| Bore | To match pipe schedule (state on order) |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose an Orifice Flange
Orifice flanges are used for flow measurement. Each flange has two ½" NPT pressure-tap holes, and jack screws help separate the pair to change the plate.
- Class 300 minimum per ASME B16.36
- Supplied in pairs with jack screws
- Pressure taps: ½" NPT, two per flange
More on choosing: Orifice flange guide.
Super Duplex S32760 Orifice Flange: Why S32760 for orifice flanges
Orifice flanges are used for flow measurement. Each flange has two ½" NPT pressure-tap holes, and jack screws help separate the pair to change the plate. In Super Duplex S32760, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Duplex flanges give stainless corrosion resistance with roughly twice the strength of 316L. Super Duplex S32760 is picked for seawater firewater, injection and offshore piping. |
|---|---|
| Typical service | Offshore — Firewater and seawater piping. |
| B16.5 material group | 2.8 |
| Bolting | B7 (coated), B8M or duplex studs, as the project specifies |
| Welding to carbon steel | ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS |
| Matching filler | ER2594 · Zeron 100X |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Super Duplex S32760 Orifice Flange Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Nickel | As specified |
| Molybdenum | As specified |
| Nitrogen | As specified |
| Copper | As specified |
| Tungsten | As specified |
| Carbon | As specified |
| Manganese | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS S32760.
Super Duplex S32760 Orifice Flange Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS S32760 — Solution-annealed plate.
Full chemistry, properties and equivalents are on the Super Duplex S32760 grade page.
Other Super Duplex S32760 flanges
Super Duplex S32760 Orifice Flange — questions buyers ask
Why is the minimum class 300 for orifice flanges?
ASME B16.36 starts at Class 300 so the flange is thick enough to drill the pressure taps radially.
What pressure rating does a Super Duplex S32760 orifice flange have?
It depends on class and temperature. Super Duplex S32760 forgings are in ASME B16.5 material group 2.8; read your class column in that group's table at the design temperature.
Can Super Duplex S32760 orifice flanges be welded to carbon steel?
Yes — ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS.
Which standard covers Super Duplex S32760 orifice flanges?
The material is ASTM A182 F55; dimensions follow ASME B16.36. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Super Duplex S32760 orifice flange?
The alloy price, the size and pressure class, quantity, and the testing and documents required. Send your list and we quote the same working day.
Can you supply Super Duplex S32760 orifice flanges to NACE MR0175?
Yes. Super Duplex S32760 is listed in NACE MR0175 / ISO 15156-3 within its limits; state NACE compliance on the order and it is confirmed on the certificate.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026