Super Duplex 2507 Orifice FlangeASTM A182 · ASME B16.36 · Manufacturer, stockist & exporter, India
UNS S32750 · W.Nr 1.4410 · ORF
A Super Duplex 2507 orifice flange is a pair of weld neck or slip-on flanges with pressure taps that hold an orifice plate, made from Super Duplex 2507 to ASTM A182 F53. Orifice flanges are used for flow measurement. Each flange has two ½" NPT pressure-tap holes, and jack screws help separate the pair to change the plate.
- ASTM A182
- ASME B16.36
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is a Super Duplex 2507 Orifice Flange?
- What it is
- A pair of weld neck or slip-on flanges with pressure taps that hold an orifice plate
- Material
- ASTM A182 F53
- Dimensions
- ASME B16.36
- Grade
- Super Duplex 2507 · UNS S32750
- Best at
- Seawater and high-chloride service where strength also matters
Super Duplex 2507 Orifice Flange Specification
| Product | Super Duplex 2507 Orifice Flange |
|---|---|
| Material standard | ASTM A182 F53 |
| Dimensional standard | ASME B16.36 |
| Sizes | 1" – 24" (ASME B16.36) |
| Pressure class | Class 300 – 2500 |
| Facing | RF · FF · RTJ · tongue & groove |
| Bore | To match pipe schedule (state on order) |
| Testing | PMI · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 · 3.2 with third-party inspection |
When to Choose an Orifice Flange
Orifice flanges are used for flow measurement. Each flange has two ½" NPT pressure-tap holes, and jack screws help separate the pair to change the plate.
- Class 300 minimum per ASME B16.36
- Supplied in pairs with jack screws
- Pressure taps: ½" NPT, two per flange
More on choosing: Orifice flange guide.
Super Duplex 2507 Orifice Flange: Why 2507 for orifice flanges
Orifice flanges are used for flow measurement. Each flange has two ½" NPT pressure-tap holes, and jack screws help separate the pair to change the plate. In Super Duplex 2507, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Duplex flanges give stainless corrosion resistance with roughly twice the strength of 316L. Super Duplex 2507 is picked for seawater and high-chloride service where strength also matters. |
|---|---|
| Typical service | Offshore & subsea — Seawater injection, firewater and subsea piping. |
| B16.5 material group | 2.8 |
| Bolting | B7 (coated), B8M or duplex studs, as the project specifies |
| Welding to carbon steel | ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS |
| Matching filler | ER2594 (AWS A5.9) |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Super Duplex 2507 Orifice Flange Chemical Composition
| Element | Weight % |
|---|---|
| Chromium | 24.0 – 26.0 |
| Nickel | 6.0 – 8.0 |
| Molybdenum | 3.0 – 5.0 |
| Nitrogen | 0.24 – 0.32 |
| Copper | 0.50 max |
| Carbon | 0.030 max |
| Manganese | 1.20 max |
| Silicon | 0.80 max |
Super Duplex 2507 Orifice Flange Mechanical Properties
| Solution-annealed plate & sheet | Value |
|---|---|
| Tensile strength | 795 MPa · 116 ksi |
| Yield strength 0.2% | 550 MPa · 80 ksi |
| Elongation | 15% |
| Hardness | 310 HB max |
Full chemistry, properties and equivalents are on the Super Duplex 2507 grade page.
Other Super Duplex 2507 flanges
Super Duplex 2507 Orifice Flanges for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiSuper Duplex 2507 Orifice Flange — questions buyers ask
Why is the minimum class 300 for orifice flanges?
ASME B16.36 starts at Class 300 so the flange is thick enough to drill the pressure taps radially.
What pressure rating does a Super Duplex 2507 orifice flange have?
It depends on class and temperature. Super Duplex 2507 forgings are in ASME B16.5 material group 2.8; read your class column in that group's table at the design temperature.
Can Super Duplex 2507 orifice flanges be welded to carbon steel?
Yes — ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS.
Which standard covers Super Duplex 2507 orifice flanges?
The material is ASTM A182 F53; dimensions follow ASME B16.36. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Super Duplex 2507 orifice flange?
The alloy price, the size and pressure class, quantity, and the testing and documents required. Send your list and we quote the same working day.
Can you supply Super Duplex 2507 orifice flanges to NACE MR0175?
Yes. Super Duplex 2507 is listed in NACE MR0175 / ISO 15156-3 within its limits; state NACE compliance on the order and it is confirmed on the certificate.
What documents do you supply?
EN 10204 3.1 mill certificates as standard, 3.2 with third-party inspection on request, plus dimensional and PMI reports.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026