SS 904L Reducing FlangeASTM A182 · ASME B16.5 · Manufacturer, trader & exporter, India
Alloy 904L · UNS N08904 · RF
An SS 904L reducing flange is a flange with a smaller bore than its outside dimensions, connecting to a smaller pipe, made from SS 904L to ASTM A182 F904L. A reducing flange changes pipe size at a flanged joint without a separate reducer, saving space and a weld. Use it where the flow disturbance from a sudden change is acceptable.
Browse all SS 904L flanges on the grade form page.
- ASTM A182
- ASME B16.5
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an SS 904L Reducing Flange?
- What it is
- A flange with a smaller bore than its outside dimensions, connecting to a smaller pipe
- Material
- ASTM A182 F904L
- Dimensions
- ASME B16.5
- Grade
- SS 904L · UNS N08904
- Best at
- Dilute sulphuric acid, phosphoric acid and chloride-bearing cooling water
SS 904L Reducing Flange Specification
| Product | SS 904L Reducing Flange |
|---|---|
| Material standard | ASTM A182 F904L |
| Dimensional standard | ASME B16.5 |
| Sizes | ½" – 24" (ASME B16.5) · 26" – 60" (ASME B16.47) |
| Pressure class | Class 150, 300, 400, 600, 900, 1500, 2500 · PN 6 – PN 100 |
| Facing | RF · FF · RTJ · tongue & groove |
| Bore | To match pipe schedule (state on order) |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Reducing Flange
A reducing flange changes pipe size at a flanged joint without a separate reducer, saving space and a weld. Use it where the flow disturbance from a sudden change is acceptable.
- Outside dimensions of the larger size
- Bore / hub for the smaller pipe
- Weld neck, slip-on or threaded styles
More on choosing: Reducing flange guide.
SS 904L Reducing Flange: Why 904L for reducing flanges
A reducing flange changes pipe size at a flanged joint without a separate reducer, saving space and a weld. Use it where the flow disturbance from a sudden change is acceptable. In SS 904L, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Stainless flanges are chosen where carbon steel would rust or contaminate the process. SS 904L is picked for dilute sulphuric acid, phosphoric acid and chloride-bearing cooling water. |
|---|---|
| Typical service | Sulphuric acid plants — Coolers, piping and tanks for dilute sulphuric acid. |
| Bolting | as the project specifies |
| Welding to carbon steel | ER309L (or E309L electrode) is the usual filler when joining it to carbon steel |
| Matching filler | ER385 (AWS A5.9) |
SS 904L Reducing Flange Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel | As specified |
| Chromium | As specified |
| Molybdenum | As specified |
| Copper | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Nitrogen | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS N08904.
SS 904L Reducing Flange Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS N08904 — Annealed plate & sheet.
Full chemistry, properties and equivalents are on the SS 904L grade page.
Other SS 904L flanges
SS 904L Reducing Flange dimensions — ASME B16.5 Class 150 & 300
Outside diameter, thickness and bolting are set by size and class. Values in mm; thickness excludes the 1.6 mm raised face.
| NPS | Cl 150 OD | Cl 150 thickness | Cl 150 bolt circle | Cl 150 bolts | Cl 300 OD | Cl 300 thickness | Cl 300 bolt circle | Cl 300 bolts |
|---|---|---|---|---|---|---|---|---|
| ½" | 90 | 9.6 | 60.3 | 4 × ½" | 95 | 12.7 | 66.7 | 4 × ½" |
| 1" | 110 | 12.7 | 79.4 | 4 × ½" | 125 | 15.9 | 88.9 | 4 × ⅝" |
| 1½" | 125 | 15.9 | 98.4 | 4 × ½" | 155 | 19.1 | 114.3 | 4 × ¾" |
| 2" | 150 | 17.5 | 120.7 | 4 × ⅝" | 165 | 20.7 | 127.0 | 8 × ⅝" |
| 3" | 190 | 22.3 | 152.4 | 4 × ⅝" | 210 | 27.0 | 168.3 | 8 × ¾" |
| 4" | 230 | 22.3 | 190.5 | 8 × ⅝" | 255 | 30.2 | 200.0 | 8 × ¾" |
| 6" | 280 | 23.9 | 241.3 | 8 × ¾" | 320 | 35.0 | 269.9 | 12 × ¾" |
| 8" | 345 | 27.0 | 298.5 | 8 × ¾" | 380 | 39.7 | 330.2 | 12 × ⅞" |
| 10" | 405 | 28.6 | 362.0 | 12 × ⅞" | 445 | 46.1 | 387.4 | 16 × 1" |
| 12" | 485 | 30.2 | 431.8 | 12 × ⅞" | 520 | 49.3 | 450.8 | 16 × 1⅛" |
Full chart: ASME B16.5 flange dimensions.
SS 904L Reducing Flange — questions buyers ask
Is a reducing flange better than a reducer plus flange?
It saves length and a weld, but a buttweld reducer gives smoother flow. Choose by space and process needs.
Can SS 904L reducing flanges be welded to carbon steel?
Yes — ER309L (or E309L electrode) is the usual filler when joining it to carbon steel.
Which standard covers SS 904L reducing flanges?
The material is ASTM A182 F904L; dimensions follow ASME B16.5. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a SS 904L reducing flange?
The alloy price, the size and pressure class, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026