SS 904L Threaded FlangeASTM A182 · ASME B16.5 · Manufacturer, stockist & exporter, India
Alloy 904L · UNS N08904 · THD
An SS 904L threaded flange is a flange with a tapered internal thread that screws onto threaded pipe, made from SS 904L to ASTM A182 F904L. Use a threaded flange where welding is not allowed — for example in explosive areas — on small-bore, low-pressure lines. Threads are NPT to ASME B1.20.1.
- ASTM A182
- ASME B16.5
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an SS 904L Threaded Flange?
- What it is
- A flange with a tapered internal thread that screws onto threaded pipe
- Material
- ASTM A182 F904L
- Dimensions
- ASME B16.5 · ASME B1.20.1
- Grade
- SS 904L · UNS N08904
- Best at
- Dilute sulphuric acid, phosphoric acid and chloride-bearing cooling water
SS 904L Threaded Flange Specification
| Product | SS 904L Threaded Flange |
|---|---|
| Material standard | ASTM A182 F904L |
| Dimensional standard | ASME B16.5 · ASME B1.20.1 |
| Sizes | ½" – 24" (ASME B16.5) · 26" – 60" (ASME B16.47) |
| Pressure class | Class 150, 300, 400, 600, 900, 1500, 2500 · PN 6 – PN 100 |
| Facing | RF · FF · RTJ · tongue & groove |
| Bore | To match pipe schedule (state on order) |
| Testing | PMI · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 · 3.2 with third-party inspection |
When to Choose a Threaded Flange
Use a threaded flange where welding is not allowed — for example in explosive areas — on small-bore, low-pressure lines. Threads are NPT to ASME B1.20.1.
- NPT threads to ASME B1.20.1
- Not for cyclic or high-temperature service
- Seal-welding is sometimes added after make-up
More on choosing: Threaded flange guide.
SS 904L Threaded Flange: Why 904L for threaded flanges
Use a threaded flange where welding is not allowed — for example in explosive areas — on small-bore, low-pressure lines. Threads are NPT to ASME B1.20.1. In SS 904L, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Stainless flanges are chosen where carbon steel would rust or contaminate the process. SS 904L is picked for dilute sulphuric acid, phosphoric acid and chloride-bearing cooling water. |
|---|---|
| Typical service | Sulphuric acid plants — Coolers, piping and tanks for dilute sulphuric acid. |
| Bolting | as the project specifies |
| Welding to carbon steel | ER309L (or E309L electrode) is the usual filler when joining it to carbon steel |
| Matching filler | ER385 (AWS A5.9) |
SS 904L Threaded Flange Chemical Composition
| Element | Weight % |
|---|---|
| Nickel | 23.0 – 28.0 |
| Chromium | 19.0 – 23.0 |
| Molybdenum | 4.0 – 5.0 |
| Copper | 1.0 – 2.0 |
| Carbon | 0.020 max |
| Manganese | 2.00 max |
| Silicon | 1.00 max |
| Nitrogen | 0.10 max |
SS 904L Threaded Flange Mechanical Properties
| Annealed plate & sheet | Value |
|---|---|
| Tensile strength | 490 MPa · 71 ksi |
| Yield strength 0.2% | 220 MPa · 31 ksi |
| Elongation | 35% |
| Hardness | 90 HRB max |
Full chemistry, properties and equivalents are on the SS 904L grade page.
Other SS 904L flanges
SS 904L Threaded Flanges for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiSS 904L Threaded Flange dimensions — ASME B16.5 Class 150 & 300
Outside diameter, thickness and bolting are set by size and class. Values in mm; thickness excludes the 1.6 mm raised face.
| NPS | Cl 150 OD | Cl 150 thickness | Cl 150 bolt circle | Cl 150 bolts | Cl 300 OD | Cl 300 thickness | Cl 300 bolt circle | Cl 300 bolts |
|---|---|---|---|---|---|---|---|---|
| ½" | 90 | 9.6 | 60.3 | 4 × ½" | 95 | 12.7 | 66.7 | 4 × ½" |
| 1" | 110 | 12.7 | 79.4 | 4 × ½" | 125 | 15.9 | 88.9 | 4 × ⅝" |
| 1½" | 125 | 15.9 | 98.4 | 4 × ½" | 155 | 19.1 | 114.3 | 4 × ¾" |
| 2" | 150 | 17.5 | 120.7 | 4 × ⅝" | 165 | 20.7 | 127.0 | 8 × ⅝" |
| 3" | 190 | 22.3 | 152.4 | 4 × ⅝" | 210 | 27.0 | 168.3 | 8 × ¾" |
| 4" | 230 | 22.3 | 190.5 | 8 × ⅝" | 255 | 30.2 | 200.0 | 8 × ¾" |
| 6" | 280 | 23.9 | 241.3 | 8 × ¾" | 320 | 35.0 | 269.9 | 12 × ¾" |
| 8" | 345 | 27.0 | 298.5 | 8 × ¾" | 380 | 39.7 | 330.2 | 12 × ⅞" |
| 10" | 405 | 28.6 | 362.0 | 12 × ⅞" | 445 | 46.1 | 387.4 | 16 × 1" |
| 12" | 485 | 30.2 | 431.8 | 12 × ⅞" | 520 | 49.3 | 450.8 | 16 × 1⅛" |
Full chart: ASME B16.5 flange dimensions.
SS 904L Threaded Flange — questions buyers ask
Can threaded flanges be used in high-pressure service?
They are rated like other flanges in their class, but threaded joints are not recommended for cyclic, high-temperature or highly corrosive service.
Can SS 904L threaded flanges be welded to carbon steel?
Yes — ER309L (or E309L electrode) is the usual filler when joining it to carbon steel.
Which standard covers SS 904L threaded flanges?
The material is ASTM A182 F904L; dimensions follow ASME B16.5 · ASME B1.20.1. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a SS 904L threaded flange?
The alloy price, the size and pressure class, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 mill certificates as standard, 3.2 with third-party inspection on request, plus dimensional and PMI reports.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026