ASTM A335 P22 LateralASTM A234 · MSS SP-43 / manufacturer standard · Manufacturer, trader & exporter, India
SA-335 P22 · 2¼Cr-1Mo alloy pipe
An ASTM A335 P22 lateral is a fitting with a 45° branch, for use with ASTM A335 P22 pipe. ASTM A335 P22 itself is a pipe or plate specification, so the matching lateral is made to ASTM A234 WP22 — which is what we supply for P22 lines. Laterals bring in a branch at 45°, reducing turbulence and pressure drop compared to a tee. Common in drainage, slurry and process lines.
- ASTM A234
- MSS SP-43 / manufacturer standard
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an ASTM A335 P22 Lateral?
- What it is
- A fitting with a 45° branch
- Material
- ASTM A234 WP22
- Dimensions
- MSS SP-43 / manufacturer standard
- Grade
- ASTM A335 P22
- Best at
- High-pressure steam and hydrogen service up to about 580 °C
ASTM A335 P22 Lateral Specification
| Product | ASTM A335 P22 Lateral |
|---|---|
| Material standard | ASTM A234 WP22 |
| Dimensional standard | MSS SP-43 / manufacturer standard |
| Sizes | ½" – 48" |
| Wall / class | Sch 5S – XXS, to match pipe |
| Ends | Bevelled to ASME B16.25 |
| Testing | Chemical & mechanical per heat · NDT · impact where specified |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Lateral
Laterals bring in a branch at 45°, reducing turbulence and pressure drop compared to a tee. Common in drainage, slurry and process lines.
- 45° branch
- Equal and reducing
- Often fabricated
More on choosing: Lateral guide.
ASTM A335 P22 Lateral: Why P22 for laterals
Laterals bring in a branch at 45°, reducing turbulence and pressure drop compared to a tee. Common in drainage, slurry and process lines. In ASTM A335 P22, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Carbon and low-alloy fittings suit hydrocarbon, steam and utility lines. ASTM A335 P22 is picked for high-pressure steam and hydrogen service up to about 580 °C. |
|---|---|
| Typical service | Power plants — High-pressure steam lines. |
| Welding to carbon steel | Matching carbon or low-alloy filler is used; joints to stainless need ER309L |
| Matching filler | ER90S-B3 / E9018-B3 |
ASTM A335 P22 Lateral Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Molybdenum | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Phosphorus | As specified |
| Sulphur | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A335 Grade P22.
ASTM A335 P22 Lateral Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A335 Grade P22 — condition per order.
Full chemistry, properties and equivalents are on the ASTM A335 P22 grade page.
Other ASTM A335 P22 pipe fittings
ASTM A335 P22 Lateral — questions buyers ask
When is a lateral better than a tee?
Where lower turbulence matters — slurries, solids and gravity drainage.
Can ASTM A335 P22 laterals be welded to carbon steel?
Yes — matching carbon or low-alloy filler is used; joints to stainless need ER309L.
Which standard covers ASTM A335 P22 laterals?
The material is ASTM A234 WP22; dimensions follow MSS SP-43 / manufacturer standard. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a ASTM A335 P22 lateral?
The steel price, the size and schedule or class, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026