Super Duplex 2507 Square TubeASTM A554 · Manufacturer, trader & exporter, India
UNS S32750 · W.Nr 1.4410
A Super Duplex 2507 square tube is square hollow section, made from Super Duplex 2507 to ASTM A554 (ornamental) · A312 / A790 for pressure. Square tube is used for frames, handrails, architecture and structures.
- ASTM A554
- ASTM A554 / EN 10219
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is a Super Duplex 2507 Square Tube?
- What it is
- Square hollow section
- Material
- ASTM A554 (ornamental) · A312 / A790 for pressure
- Dimensions
- ASTM A554 / EN 10219
- Grade
- Super Duplex 2507 · UNS S32750
- Best at
- Seawater and high-chloride service where strength also matters
Super Duplex 2507 Square Tube Specification
| Product | Super Duplex 2507 Square Tube |
|---|---|
| Material standard | ASTM A554 (ornamental) · A312 / A790 for pressure |
| Dimensional standard | ASTM A554 / EN 10219 |
| Sizes | OD × wall to order |
| Length | Random, double random or cut lengths |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Square Tube
Square tube is used for frames, handrails, architecture and structures.
- Square hollow section
- Polished or mill finish
- Cut lengths
More on choosing: Square tube guide.
Super Duplex 2507 Square Tube: Why 2507 for square tubes
Square tube is used for frames, handrails, architecture and structures. In Super Duplex 2507, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Duplex tubulars combine strength and chloride resistance. Super Duplex 2507 is picked for seawater and high-chloride service where strength also matters. |
|---|---|
| Typical service | Offshore & subsea — Seawater injection, firewater and subsea piping. |
| Welding to carbon steel | ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS |
| Matching filler | ER2594 (AWS A5.9) |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Super Duplex 2507 Square Tube Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Nickel | As specified |
| Molybdenum | As specified |
| Nitrogen | As specified |
| Copper | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS S32750.
Super Duplex 2507 Square Tube Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS S32750 — Solution-annealed plate & sheet.
Full chemistry, properties and equivalents are on the Super Duplex 2507 grade page.
Standards on this page
Super Duplex 2507 Square Tube — questions buyers ask
What finishes are available on square tube?
Mill finish, 180–320 grit polish and hairline, depending on grade.
Can Super Duplex 2507 square tubes be welded to carbon steel?
Yes — ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS.
Which standard covers Super Duplex 2507 square tubes?
The material is ASTM A554 (ornamental) · A312 / A790 for pressure; dimensions follow ASTM A554 / EN 10219. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Super Duplex 2507 square tube?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026