SS 904L Square TubeASTM A554 · Manufacturer, trader & exporter, India
Alloy 904L · UNS N08904
An SS 904L square tube is square hollow section, made from SS 904L to ASTM A554 (ornamental) · A312 / A790 for pressure. Square tube is used for frames, handrails, architecture and structures.
See also SS 904L pipe for seamless and welded options.
- ASTM A554
- ASTM A554 / EN 10219
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an SS 904L Square Tube?
- What it is
- Square hollow section
- Material
- ASTM A554 (ornamental) · A312 / A790 for pressure
- Dimensions
- ASTM A554 / EN 10219
- Grade
- SS 904L · UNS N08904
- Best at
- Dilute sulphuric acid, phosphoric acid and chloride-bearing cooling water
SS 904L Square Tube Specification
| Product | SS 904L Square Tube |
|---|---|
| Material standard | ASTM A554 (ornamental) · A312 / A790 for pressure |
| Dimensional standard | ASTM A554 / EN 10219 |
| Sizes | OD × wall to order |
| Length | Random, double random or cut lengths |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Square Tube
Square tube is used for frames, handrails, architecture and structures.
- Square hollow section
- Polished or mill finish
- Cut lengths
More on choosing: Square tube guide.
SS 904L Square Tube: Why 904L for square tubes
Square tube is used for frames, handrails, architecture and structures. In SS 904L, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Stainless tubulars are the default for corrosive and hygienic service. SS 904L is picked for dilute sulphuric acid, phosphoric acid and chloride-bearing cooling water. |
|---|---|
| Typical service | Sulphuric acid plants — Coolers, piping and tanks for dilute sulphuric acid. |
| Welding to carbon steel | ER309L (or E309L electrode) is the usual filler when joining it to carbon steel |
| Matching filler | ER385 (AWS A5.9) |
SS 904L Square Tube Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel | As specified |
| Chromium | As specified |
| Molybdenum | As specified |
| Copper | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Nitrogen | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS N08904.
SS 904L Square Tube Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS N08904 — Annealed plate & sheet.
Full chemistry, properties and equivalents are on the SS 904L grade page.
Standards on this page
Other SS 904L pipes & tubes
SS 904L Square Tube — questions buyers ask
What finishes are available on square tube?
Mill finish, 180–320 grit polish and hairline, depending on grade.
Can SS 904L square tubes be welded to carbon steel?
Yes — ER309L (or E309L electrode) is the usual filler when joining it to carbon steel.
Which standard covers SS 904L square tubes?
The material is ASTM A554 (ornamental) · A312 / A790 for pressure; dimensions follow ASTM A554 / EN 10219. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a SS 904L square tube?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026