SS 904L Seamless PipeASTM A312 · ASME B36.19 · Manufacturer, stockist & exporter, India
Alloy 904L · UNS N08904
An SS 904L seamless pipe is pipe made without a weld seam, by piercing and drawing, made from SS 904L to ASTM A312 (N08904). Seamless pipe is the choice for high pressure, high temperature and critical service where a weld seam is not wanted.
- ASTM A312
- ASME B36.19
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an SS 904L Seamless Pipe?
- What it is
- Pipe made without a weld seam, by piercing and drawing
- Material
- ASTM A312 (N08904)
- Dimensions
- ASME B36.19 · B36.10
- Grade
- SS 904L · UNS N08904
- Best at
- Dilute sulphuric acid, phosphoric acid and chloride-bearing cooling water
SS 904L Seamless Pipe Specification
| Product | SS 904L Seamless Pipe |
|---|---|
| Material standard | ASTM A312 (N08904) |
| Dimensional standard | ASME B36.19 · B36.10 |
| Sizes | NPS ⅛" – 24", Sch 5S – XXS |
| Length | Random, double random or cut lengths |
| Testing | PMI · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 · 3.2 with third-party inspection |
When to Choose a Seamless Pipe
Seamless pipe is the choice for high pressure, high temperature and critical service where a weld seam is not wanted.
- No weld seam
- NPS ⅛" – 24"
- Schedules 5S – XXS
More on choosing: Seamless pipe guide.
SS 904L Seamless Pipe: Why 904L for seamless pipes
Seamless pipe is the choice for high pressure, high temperature and critical service where a weld seam is not wanted. In SS 904L, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Stainless tubulars are the default for corrosive and hygienic service. SS 904L is picked for dilute sulphuric acid, phosphoric acid and chloride-bearing cooling water. |
|---|---|
| Typical service | Sulphuric acid plants — Coolers, piping and tanks for dilute sulphuric acid. |
| Welding to carbon steel | ER309L (or E309L electrode) is the usual filler when joining it to carbon steel |
| Matching filler | ER385 (AWS A5.9) |
SS 904L Seamless Pipe Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel | As specified |
| Chromium | As specified |
| Molybdenum | As specified |
| Copper | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Nitrogen | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS N08904.
SS 904L Seamless Pipe Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS N08904 — Annealed plate & sheet.
Full chemistry, properties and equivalents are on the SS 904L grade page.
Other SS 904L pipes & tubes
SS 904L Seamless Pipes for export
FOB / CIF · Nhava Sheva (JNPT), MumbaiSS 904L Seamless Pipe — questions buyers ask
Why choose seamless over welded pipe?
No longitudinal weld means uniform strength and corrosion resistance — preferred for pressure and critical service.
Can SS 904L seamless pipes be welded to carbon steel?
Yes — ER309L (or E309L electrode) is the usual filler when joining it to carbon steel.
Which standard covers SS 904L seamless pipes?
The material is ASTM A312 (N08904); dimensions follow ASME B36.19 · B36.10. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a SS 904L seamless pipe?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 mill certificates as standard, 3.2 with third-party inspection on request, plus dimensional and PMI reports.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026