SS 310 / 310S Seamless PipeASTM A312 · ASME B36.19 · Manufacturer, trader & exporter, India
AISI 310S · UNS S31008
An SS 310 / 310S seamless pipe is pipe made without a weld seam, by piercing and drawing, made from SS 310 / 310S to ASTM A312 TP310S. Seamless pipe is the choice for high pressure, high temperature and critical service where a weld seam is not wanted.
- ASTM A312
- ASME B36.19
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an SS 310 / 310S Seamless Pipe?
- What it is
- Pipe made without a weld seam, by piercing and drawing
- Material
- ASTM A312 TP310S
- Dimensions
- ASME B36.19 · B36.10
- Grade
- SS 310 / 310S · UNS S31008
- Best at
- Furnaces, burners and heat treatment at high temperature
SS 310 / 310S Seamless Pipe Specification
| Product | SS 310 / 310S Seamless Pipe |
|---|---|
| Material standard | ASTM A312 TP310S |
| Dimensional standard | ASME B36.19 · B36.10 |
| Sizes | NPS ⅛" – 24", Sch 5S – XXS |
| Length | Random, double random or cut lengths |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Seamless Pipe
Seamless pipe is the choice for high pressure, high temperature and critical service where a weld seam is not wanted.
- No weld seam
- NPS ⅛" – 24"
- Schedules 5S – XXS
More on choosing: Seamless pipe guide.
SS 310 / 310S Seamless Pipe: Why 310S for seamless pipes
Seamless pipe is the choice for high pressure, high temperature and critical service where a weld seam is not wanted. In SS 310 / 310S, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Stainless tubulars are the default for corrosive and hygienic service. SS 310 / 310S is picked for furnaces, burners and heat treatment at high temperature. |
|---|---|
| Typical service | Furnace parts — Muffles, retorts, radiant tubes and conveyor belts. |
| Welding to carbon steel | ER309L (or E309L electrode) is the usual filler when joining it to carbon steel |
| Matching filler | ER310 (AWS A5.9) |
SS 310 / 310S Seamless Pipe Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Nickel | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Phosphorus | As specified |
| Sulphur | As specified |
| Iron | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS S31008.
SS 310 / 310S Seamless Pipe Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS S31008 — Annealed plate & sheet.
Full chemistry, properties and equivalents are on the SS 310 / 310S grade page.
Other SS 310 / 310S pipes & tubes
SS 310 / 310S Seamless Pipe — questions buyers ask
Why choose seamless over welded pipe?
No longitudinal weld means uniform strength and corrosion resistance — preferred for pressure and critical service.
Can SS 310 / 310S seamless pipes be welded to carbon steel?
Yes — ER309L (or E309L electrode) is the usual filler when joining it to carbon steel.
Which standard covers SS 310 / 310S seamless pipes?
The material is ASTM A312 TP310S; dimensions follow ASME B36.19 · B36.10. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a SS 310 / 310S seamless pipe?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026