SS 310 / 310S Capillary TubeASTM A213 · ASTM A269 / A632 · Manufacturer, trader & exporter, India
AISI 310S · UNS S31008
An SS 310 / 310S capillary tube is small-bore tube for instruments and medical use, made from SS 310 / 310S to ASTM A213. Capillary tubes have very small diameters and walls for instrumentation, thermometry and medical devices.
- ASTM A213
- ASTM A269 / A632
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an SS 310 / 310S Capillary Tube?
- What it is
- Small-bore tube for instruments and medical use
- Material
- ASTM A213
- Dimensions
- ASTM A269 / A632
- Grade
- SS 310 / 310S · UNS S31008
- Best at
- Furnaces, burners and heat treatment at high temperature
SS 310 / 310S Capillary Tube Specification
| Product | SS 310 / 310S Capillary Tube |
|---|---|
| Material standard | ASTM A213 |
| Dimensional standard | ASTM A269 / A632 |
| Sizes | OD × wall to order |
| Length | Random, double random or cut lengths |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Capillary Tube
Capillary tubes have very small diameters and walls for instrumentation, thermometry and medical devices.
- Very small OD
- Bright annealed
- Coils or cut lengths
More on choosing: Capillary tube guide.
SS 310 / 310S Capillary Tube: Why 310S for capillary tubes
Capillary tubes have very small diameters and walls for instrumentation, thermometry and medical devices. In SS 310 / 310S, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Stainless tubulars are the default for corrosive and hygienic service. SS 310 / 310S is picked for furnaces, burners and heat treatment at high temperature. |
|---|---|
| Typical service | Furnace parts — Muffles, retorts, radiant tubes and conveyor belts. |
| Welding to carbon steel | ER309L (or E309L electrode) is the usual filler when joining it to carbon steel |
| Matching filler | ER310 (AWS A5.9) |
SS 310 / 310S Capillary Tube Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Nickel | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Phosphorus | As specified |
| Sulphur | As specified |
| Iron | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS S31008.
SS 310 / 310S Capillary Tube Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS S31008 — Annealed plate & sheet.
Full chemistry, properties and equivalents are on the SS 310 / 310S grade page.
Other SS 310 / 310S pipes & tubes
SS 310 / 310S Capillary Tube — questions buyers ask
What sizes are capillary tubes?
Commonly 0.3 – 6 mm OD with thin walls, supplied in coils or cut lengths.
Can SS 310 / 310S capillary tubes be welded to carbon steel?
Yes — ER309L (or E309L electrode) is the usual filler when joining it to carbon steel.
Which standard covers SS 310 / 310S capillary tubes?
The material is ASTM A213; dimensions follow ASTM A269 / A632. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a SS 310 / 310S capillary tube?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026