Super Duplex 2507 Seamless PipeASTM A790 · ASME B36.19 · Manufacturer, trader & exporter, India
UNS S32750 · W.Nr 1.4410
A Super Duplex 2507 seamless pipe is pipe made without a weld seam, by piercing and drawing, made from Super Duplex 2507 to ASTM A790. Seamless pipe is the choice for high pressure, high temperature and critical service where a weld seam is not wanted.
- ASTM A790
- ASME B36.19
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is a Super Duplex 2507 Seamless Pipe?
- What it is
- Pipe made without a weld seam, by piercing and drawing
- Material
- ASTM A790
- Dimensions
- ASME B36.19 · B36.10
- Grade
- Super Duplex 2507 · UNS S32750
- Best at
- Seawater and high-chloride service where strength also matters
Super Duplex 2507 Seamless Pipe Specification
| Product | Super Duplex 2507 Seamless Pipe |
|---|---|
| Material standard | ASTM A790 |
| Dimensional standard | ASME B36.19 · B36.10 |
| Sizes | NPS ⅛" – 24", Sch 5S – XXS |
| Length | Random, double random or cut lengths |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Seamless Pipe
Seamless pipe is the choice for high pressure, high temperature and critical service where a weld seam is not wanted.
- No weld seam
- NPS ⅛" – 24"
- Schedules 5S – XXS
More on choosing: Seamless pipe guide.
Super Duplex 2507 Seamless Pipe: Why 2507 for seamless pipes
Seamless pipe is the choice for high pressure, high temperature and critical service where a weld seam is not wanted. In Super Duplex 2507, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Duplex tubulars combine strength and chloride resistance. Super Duplex 2507 is picked for seawater and high-chloride service where strength also matters. |
|---|---|
| Typical service | Offshore & subsea — Seawater injection, firewater and subsea piping. |
| Welding to carbon steel | ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS |
| Matching filler | ER2594 (AWS A5.9) |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Super Duplex 2507 Seamless Pipe Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Nickel | As specified |
| Molybdenum | As specified |
| Nitrogen | As specified |
| Copper | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS S32750.
Super Duplex 2507 Seamless Pipe Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS S32750 — Solution-annealed plate & sheet.
Full chemistry, properties and equivalents are on the Super Duplex 2507 grade page.
Super Duplex 2507 Seamless Pipe — questions buyers ask
Why choose seamless over welded pipe?
No longitudinal weld means uniform strength and corrosion resistance — preferred for pressure and critical service.
Can Super Duplex 2507 seamless pipes be welded to carbon steel?
Yes — ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS.
Which standard covers Super Duplex 2507 seamless pipes?
The material is ASTM A790; dimensions follow ASME B36.19 · B36.10. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Super Duplex 2507 seamless pipe?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026