ASTM A335 P11 Seamless PipeASTM A335 · ASME B36.19 · Manufacturer, trader & exporter, India
SA-335 P11 · 1¼Cr-½Mo alloy pipe
An ASTM A335 P11 seamless pipe is pipe made without a weld seam, by piercing and drawing, made from ASTM A335 P11 to ASTM A335 P11. Seamless pipe is the choice for high pressure, high temperature and critical service where a weld seam is not wanted.
- ASTM A335
- ASME B36.19
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an ASTM A335 P11 Seamless Pipe?
- What it is
- Pipe made without a weld seam, by piercing and drawing
- Material
- ASTM A335 P11
- Dimensions
- ASME B36.19 · B36.10
- Grade
- ASTM A335 P11
- Best at
- Steam and hot-oil piping up to about 550 °C
ASTM A335 P11 Seamless Pipe Specification
| Product | ASTM A335 P11 Seamless Pipe |
|---|---|
| Material standard | ASTM A335 P11 |
| Dimensional standard | ASME B36.19 · B36.10 |
| Sizes | NPS ⅛" – 24", Sch 5S – XXS |
| Length | Random, double random or cut lengths |
| Testing | Chemical & mechanical per heat · NDT · impact where specified |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Seamless Pipe
Seamless pipe is the choice for high pressure, high temperature and critical service where a weld seam is not wanted.
- No weld seam
- NPS ⅛" – 24"
- Schedules 5S – XXS
More on choosing: Seamless pipe guide.
ASTM A335 P11 Seamless Pipe: Why P11 for seamless pipes
Seamless pipe is the choice for high pressure, high temperature and critical service where a weld seam is not wanted. In ASTM A335 P11, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Carbon steel tubulars carry most hydrocarbon and utility service. ASTM A335 P11 is picked for steam and hot-oil piping up to about 550 °C. |
|---|---|
| Typical service | Power plants — Main steam and reheat lines. |
| Welding to carbon steel | Matching carbon or low-alloy filler is used; joints to stainless need ER309L |
| Matching filler | ER80S-B2 / E8018-B2 |
ASTM A335 P11 Seamless Pipe Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Molybdenum | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
| Phosphorus | As specified |
| Sulphur | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A335 Grade P11.
ASTM A335 P11 Seamless Pipe Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A335 Grade P11 — condition per order.
Full chemistry, properties and equivalents are on the ASTM A335 P11 grade page.
Other ASTM A335 P11 pipes & tubes
ASTM A335 P11 Seamless Pipe — questions buyers ask
Why choose seamless over welded pipe?
No longitudinal weld means uniform strength and corrosion resistance — preferred for pressure and critical service.
Can ASTM A335 P11 seamless pipes be welded to carbon steel?
Yes — matching carbon or low-alloy filler is used; joints to stainless need ER309L.
Which standard covers ASTM A335 P11 seamless pipes?
The material is ASTM A335 P11; dimensions follow ASME B36.19 · B36.10. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a ASTM A335 P11 seamless pipe?
The steel price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026