Super Duplex S32760 Round TubeASTM A789 · Tube specification · Manufacturer, trader & exporter, India
UNS S32760 · W.Nr 1.4501
A Super Duplex S32760 round tube is tube ordered by exact OD and wall thickness, made from Super Duplex S32760 to ASTM A789. Round tube is used for heat exchangers, boilers and instruments, with tighter tolerances than pipe.
- ASTM A789
- Tube specification
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is a Super Duplex S32760 Round Tube?
- What it is
- Tube ordered by exact OD and wall thickness
- Material
- ASTM A789
- Dimensions
- Tube specification
- Grade
- Super Duplex S32760 · UNS S32760
- Best at
- Seawater firewater, injection and offshore piping
Super Duplex S32760 Round Tube Specification
| Product | Super Duplex S32760 Round Tube |
|---|---|
| Material standard | ASTM A789 |
| Dimensional standard | Tube specification |
| Sizes | OD × wall to order |
| Length | Random, double random or cut lengths |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Round Tube
Round tube is used for heat exchangers, boilers and instruments, with tighter tolerances than pipe.
- OD × wall ordering
- Seamless or welded
- Straight or U-bent
More on choosing: Round tube guide.
Super Duplex S32760 Round Tube: Why S32760 for round tubes
Round tube is used for heat exchangers, boilers and instruments, with tighter tolerances than pipe. In Super Duplex S32760, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Duplex tubulars combine strength and chloride resistance. Super Duplex S32760 is picked for seawater firewater, injection and offshore piping. |
|---|---|
| Typical service | Offshore — Firewater and seawater piping. |
| Welding to carbon steel | ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS |
| Matching filler | ER2594 · Zeron 100X |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Super Duplex S32760 Round Tube Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Nickel | As specified |
| Molybdenum | As specified |
| Nitrogen | As specified |
| Copper | As specified |
| Tungsten | As specified |
| Carbon | As specified |
| Manganese | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS S32760.
Super Duplex S32760 Round Tube Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS S32760 — Solution-annealed plate.
Full chemistry, properties and equivalents are on the Super Duplex S32760 grade page.
Super Duplex S32760 Round Tube — questions buyers ask
What is the difference between tube and pipe?
Tube is specified by exact OD and wall; pipe by nominal size and schedule.
Can Super Duplex S32760 round tubes be welded to carbon steel?
Yes — ER2209 or ER309L(Mo) is used when joining it to carbon steel, under a qualified WPS.
Which standard covers Super Duplex S32760 round tubes?
The material is ASTM A789; dimensions follow Tube specification. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Super Duplex S32760 round tube?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026