Inconel 825 Round TubeASTM B163 · Tube specification · Manufacturer, trader & exporter, India
Incoloy 825 · Alloy 825
An Inconel 825 round tube is tube ordered by exact OD and wall thickness, made from Inconel 825 to ASTM B163 · B423. Round tube is used for heat exchangers, boilers and instruments, with tighter tolerances than pipe.
See also Inconel 825 pipe for seamless and welded options.
- ASTM B163
- Tube specification
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is an Inconel 825 Round Tube?
- What it is
- Tube ordered by exact OD and wall thickness
- Material
- ASTM B163 · B423
- Dimensions
- Tube specification
- Grade
- Inconel 825 · UNS N08825
- Best at
- Sulphuric and phosphoric acid service, chloride stress-corrosion cracking and sour gas
Inconel 825 Round Tube Specification
| Product | Inconel 825 Round Tube |
|---|---|
| Material standard | ASTM B163 · B423 |
| Dimensional standard | Tube specification |
| Sizes | OD × wall to order |
| Length | Random, double random or cut lengths |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Round Tube
Round tube is used for heat exchangers, boilers and instruments, with tighter tolerances than pipe.
- OD × wall ordering
- Seamless or welded
- Straight or U-bent
More on choosing: Round tube guide.
Inconel 825 Round Tube: Why 825 for round tubes
Round tube is used for heat exchangers, boilers and instruments, with tighter tolerances than pipe. In Inconel 825, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Nickel-alloy tubulars handle acids, chlorides and heat. Inconel 825 is picked for sulphuric and phosphoric acid service, chloride stress-corrosion cracking and sour gas. |
|---|---|
| Typical service | Sulphuric & phosphoric acid plants — Tank linings, agitators, heat-exchanger baffles in fertiliser and acid production. |
| Welding to carbon steel | A nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel |
| Matching filler | ERNiFeCr-1 (AWS A5.14) |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Inconel 825 Round Tube Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Nickel | As specified |
| Iron | As specified |
| Chromium | As specified |
| Molybdenum | As specified |
| Copper | As specified |
| Titanium | As specified |
| Carbon | As specified |
| Manganese | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM B424 / B423 / B564 for UNS N08825.
Inconel 825 Round Tube Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM B424 / B423 / B564 for UNS N08825 — Annealed.
Full chemistry, properties and equivalents are on the Inconel 825 grade page.
Inconel 825 Round Tube — questions buyers ask
What is the difference between tube and pipe?
Tube is specified by exact OD and wall; pipe by nominal size and schedule.
Can Inconel 825 round tubes be welded to carbon steel?
Yes — a nickel-base filler such as ERNiCr-3 (or ERNiCrMo-3) is used when joining it to carbon steel.
Which standard covers Inconel 825 round tubes?
The material is ASTM B163 · B423; dimensions follow Tube specification. Always state both on your purchase order, with the edition if your project specifies one.
What decides the price of a Inconel 825 round tube?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026