Super Duplex 2507 WasherUNS S32750 · ASME B18.22.1 · Manufacturer, trader & exporter, India
UNS S32750 · W.Nr 1.4410
A Super Duplex 2507 washer is a flat or spring ring that spreads bolt load. Finished fastener specification not asserted; material and manufacturing route not asserted — alloy (UNS S32750), dimensions and finished requirements are to the purchase specification. Flat washers protect the joint surface and spread load; spring and lock washers resist loosening. Match the washer material to the bolt to avoid galvanic corrosion.
- UNS S32750
- ASME B18.22.1
- EN 10204 3.1 / 3.2
- Export packing
Reviewed by the Kanak Steel & Engineering Co. technical team · Updated October 2026
What is a Super Duplex 2507 Washer?
- What it is
- A flat or spring ring that spreads bolt load
- Finished spec
- Not asserted
- Material / feedstock
- Not asserted — alloy (UNS S32750), dimensions and finished requirements are to the purchase specification
- Dimensions
- ASME B18.22.1 · DIN 125 (legacy DIN)
- Grade
- Super Duplex 2507 · UNS S32750
- Best at
- Seawater and high-chloride service where strength also matters
Super Duplex 2507 Washer Specification
| Product | Super Duplex 2507 Washer |
|---|---|
| Finished fastener specification | Not asserted |
| Material / feedstock specification | Not asserted — alloy (UNS S32750), dimensions and finished requirements are to the purchase specification |
| Dimensional standard | ASME B18.22.1 · DIN 125 (legacy DIN) |
| Manufacturing route | Not asserted |
| Project / purchase specification | Yes — finished fastener requirements are to the purchase specification or project drawing |
| Sizes | To suit M10 – M64 · ½" – 4" bolts (others on request) |
| Testing | PMI (as specified in the PO) · dimensional · NDT and IGC on request |
| Documents | EN 10204 3.1 or 3.2 on request / as specified in the PO |
When to Choose a Washer
Flat washers protect the joint surface and spread load; spring and lock washers resist loosening. Match the washer material to the bolt to avoid galvanic corrosion.
- Flat, spring and lock
- ASME B18.21.1 · DIN 125 / 127 (legacy DIN)
- Material to match the bolt
More on choosing: Washer guide.
Super Duplex 2507 Washer: Why 2507 for washers
Flat washers protect the joint surface and spread load; spring and lock washers resist loosening. Match the washer material to the bolt to avoid galvanic corrosion. In Super Duplex 2507, the choice usually comes down to the medium and temperature — the rows here are the points buyers check for this exact combination.
| Why this grade | Duplex fasteners add strength in chloride service. Super Duplex 2507 is picked for seawater and high-chloride service where strength also matters. |
|---|---|
| Typical service | Offshore & subsea — Seawater injection, firewater and subsea piping. |
| Bolting | B7 (coated), B8M or duplex studs, as the project specifies |
| Sour service | Listed in NACE MR0175 / ISO 15156-3 within its limits — state it on the order |
Super Duplex 2507 Washer Chemical Composition
Under technical review for TDS.
| Element | Current requirement |
|---|---|
| Chromium | As specified |
| Nickel | As specified |
| Molybdenum | As specified |
| Nitrogen | As specified |
| Copper | As specified |
| Carbon | As specified |
| Manganese | As specified |
| Silicon | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification to be verified: ASTM A240 for UNS S32750.
Super Duplex 2507 Washer Mechanical Properties
Under technical review for TDS.
| Property | Current requirement |
|---|---|
| Tensile strength | As specified |
| Yield strength 0.2% | As specified |
| Elongation | As specified |
| Hardness | As specified |
Numerical specification requirements are published only after the applicable current standard edition has been verified. Governing specification and condition to be verified: ASTM A240 for UNS S32750 — Solution-annealed plate & sheet.
Full chemistry, properties and equivalents are on the Super Duplex 2507 grade page.
Standards on this page
Other Super Duplex 2507 fasteners
Super Duplex 2507 Washer — questions buyers ask
Do I need washers on flange bolting?
Many specifications require through-hardened washers under nuts for controlled tightening; follow the project bolting spec.
What nut is used with Super Duplex 2507 washers?
Usually a nut in the same alloy — it may be machined from ASTM A276 / A479 bar, where applicable; finished requirements are to the purchase specification or project drawing.
Which standard covers Super Duplex 2507 washers?
Finished fastener specification: Not asserted. Material / feedstock: Not asserted — alloy (UNS S32750), dimensions and finished requirements are to the purchase specification. Dimensions: ASME B18.22.1 · DIN 125 (legacy DIN). State the finished specification, material and dimensions on your purchase order or project drawing.
What decides the price of a Super Duplex 2507 washer?
The alloy price, the size and dimensions, quantity, and the testing and documents required. Send your list and we quote the same working day.
What documents do you supply?
EN 10204 3.1 or 3.2 certificates available on request / as specified in the PO; dimensional reports as required. PMI can be arranged depending on product and requirements, as specified in the PO.
Sources: the ASTM / ASME specifications named on this page and producer datasheets · Last updated October 2026